Handleiding
Je bekijkt pagina 59 van 84
43BDL4650D/50BDL4650D/55BDL4650D
57
6.2. Supplementary
6.2.1. Quick Info
Press “Info + 77” to startup quick info.
Quick info will show “Network” and “Monitor Information”.
Note:
Operation hours: updates every minute.
Heat status : updates every 5 seconds.
6.2.2. How to custom an Android boot
animation?
1. Overview
The Android boot animation is a script used to load PNG les
when the device boots. It is included in an uncompressed zip
le called bootanimation.zip.
2. In the bootanimation.zip le
The bootanimation.zip as follows:
• The image folder (contains PNG images named in
incremental numbers)
• The desc.txt le
(1) The image folder
This folder contains PNG images that are named by
numbers, starting from something like 0000.png or 0001.
png and increasing by increments of 1. The minimum
number of folder is 1 and the maximum number of folder
is unlimited.
(2) The desc.txt le
This le denes how the images in the folder(s) are
displayed during the boot animation, in the following
format:
-
Width Height Frame-rate
-
mode Loop delay-time Folder1
-
mode Loop delay-time Folder2
An example of a desc.txt le is:
-
1920 1080 30
-
p 1 0 part0
-
p 0 0 part1
a. The rst line
1920 and 1080 dene the width and height of the
screen resolution.
30 is the frame rate in fps (frames per second) i.e.
number of images to display per second.
b. The second and third lines have a same format.
The rst “p” means that the play mode stops
immediately when the boot process is complete.
The number next to ‘p’ denes the repeat mode
-
Set to 0 to make the part loop indenitely until the
device boot is complete.
-
Set to 1 to make the part playback for once.
The next number denes the delay time(ms). For
example, if it is set to 10, the system will be delayed for
10ms when all image les have nished playing.
Part0 and part1 refer to image folder names.
As to the above example, the boot animation will play at a
resolution of 1920 by 1080 pixels, at a frame rate of 30 fps,
starting with the contents of part0 folder. After playing them
in one loop, switch to the contents of part1 folder and play
them continuously until the device boot process is complete.
3. Zip le:
Select all (including image folders and desc.txt) inside
the Bootanimation folder and zip them into a new
uncompressed zip archive using your favorite compression
utility such as 7zip or WinRAR and so on.
If using 7zip, set compression level to “Store”.
If using WinRAR, set “Compression method” to “Store”.
Bekijk gratis de handleiding van Philips 50BDL4650D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philips |
| Model | 50BDL4650D |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 12976 MB |
