Handleiding
Je bekijkt pagina 37 van 80
• Surround AI - Optimum surround effect using AI
analysis.
* Some of Easylink 2.0 HDMI sound system only
supports Surround Mode to switch on or off virtual
surround.
DRC
(Home) > Settings > Sound > EasyLink 2.0 > DRC.
Select the preferred Dynamic Range Control (DRC).
• Auto - Dynamic range is automatically adjusted.
• On - Optimize the dynamic range.
• Off - Turn off dynamic range adjustment.
Height speakers
(Home) > Settings > Sound > EasyLink 2.0 > Height
speakers.
Select the preferred height speakers movement. The
setting is only available when connected device is
compatible with TV for the feature.
• Auto - Dynamic movement follow contents.
• On - Always elevated.
• Off - Flat position.
Select sound stage
(Home) > Settings > Sound > EasyLink 2.0 > Sound
stage.
Select a listening experience. The setting is only
available when connected device is compatible with TV
for the feature.
• Auto - Dynamic setting follow contents.
• On - Immersive Sound Stage, good for watching
movies.
• Off - Crystal Sound Stage, good for listening to music
and dialogue.
Subwoofer
(Home) > Settings > Sound > EasyLink 2.0 >
Subwoofer.
Adjust subwoofer level.
Dolby Atmos
(Home) > Settings > Sound > EasyLink 2.0 > Dolby
Atmos.
Adjust Dolby Atmos height loudness.
DTS TruVolume
(Home) > Settings > Sound > EasyLink 2.0 > DTS
TruVolume.
Select consistent volume level.
Night Mode
(Home) > Settings > Sound > EasyLink 2.0 > Night
Mode.
Select comfortable quiet listening level.
Auto Volume
(Home) > Settings > Sound > EasyLink 2.0 > Auto
Volume.
Control the sound listening level.
Display
(Home) > Settings > Sound > EasyLink 2.0 > Display.
Set to turn off display automatically.
Reset all to default
(Home) > Settings > Sound > EasyLink 2.0 > Reset all
to default.
Reset all the EasyLink 2.0 sound settings back to the
original factory settings.
Room Calibration
Room calibration
(Home) > Settings > Sound > Room calibration.
This calibration will allow the TV to determine the
acoustics in your room and provide optimised sound
quality on the TV speakers that best match the
acoustics.
You need to pair your remote control with the TV
before starting the setup and make sure the TV Audio
out setting is TV speakers. For a more accurate result,
please keep the room quiet.
To start the room calibration:
1 - Hold your remote control at the listening position
and point it towards the TV during the tuning process.
2 - Select Calibrate now or Calibrate again to start the
calibration.
3 - A test sound will be played and measured through
your remote control. Hold your remote control and
point it towards the TV, this can take several seconds.
4 - Once your TV speakers are successfully calibrated,
select Test to listen to the sound before and after the
TV speakers are calibrated. Select Apply to accept the
37
Bekijk gratis de handleiding van Philips 43PUS8560, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philips |
| Model | 43PUS8560 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 8816 MB |
