Handleiding
Je bekijkt pagina 9 van 68
3.3. IR sensor
The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point the
remote control at the infrared sensor on the front of
the TV.
Warning
Do not put any objects in front of IR sensor of the TV as
it may block the IR signal.
3.4. Batteries and Cleaning
Replace batteries
Refer to the Quick Start Guide in your product package
for detailed information about the remote control
batteries.
If the TV does not react to a button being pressed on
the remote control, the batteries might be dead.
To replace the batteries, open the battery compartment
on the back of the remote control.
1 - Slide the battery door in the direction shown by the
arrow.
2 - Replace the old batteries with new batteries. Make
sure the + and the - ends of the batteries line up
correctly.
3 - Reposition the battery door and slide it back until it
clicks.
• Remove the batteries if you are not using the remote
control for a long time.
• Safely dispose of your old batteries according to the
end of use directions.
For more information, check on Help > User manual >
End of use.
Cleaning
Your remote control is treated with a scratch-resistant
coating.
To clean the remote control, use a soft damp cloth.
Never use substances such as alcohol, chemicals or
household cleaners on the remote control.
3.5. Voice Assistant
Your TV supports voice control operations from the
remote control.
About Voice Assistant
Voice Assistant is a voice service available on your TV
and remote control. With Voice Assistant working on
your TV, you can change channels, change volume and
more.
To control your TV with Voice Assistant, you will need
to pair the remote control with your TV.
Voice Assistant settings
To adjust Voice Assistant setting, go to
(Home) > Settings > General settings > Voice Assistant
settings to turn on or off the Voice Assistant. When
Voice Assistant is enabled, you can select preferred
language* of Voice Assistant.
* Note: supported languages: English, Brazilian
Portuguese, Argentinian Spanish.
Using Voice Assistant on TV
1 - Make sure the remote control is paired with your TV.
2 - Press and hold Voice Assistant key on remote
control to active the microphone.
3 - Speak out what you need to operate the TV with
clear pronunciation.
4 - Once the voice input is done, release the key to start
the operation. It might take some time to perform the
operation.
Here are some things to try:
CHANGE CHANNEL
"Channel Up"
"Channel Down"
"Tune to channel 5"
CHANGE VOLUME
"Volume Up"
"Volume Down"
MUTE OR UNMUTE TV
"Mute"
"Unmute"
9
Bekijk gratis de handleiding van Philips 43PUD8100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philips |
| Model | 43PUD8100 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 7214 MB |
