Handleiding
Je bekijkt pagina 21 van 29
19EN
English
Enabling or disabling HDMI CEC
Once an HDMI-CEC compatible device
has been switched on, the TV will
automatically turn on and switch to the
correct signal source.
Note
• Do not enable this function if you would
prefer not to use HDMI CEC.
1 Press (Home) and select [Setting]
to enter the [Setting] menu.
2 Select [HDMI CEC].
3 Select [O] or [On], then press OK.
Using One-touch Play
1 Once HDMI CEC has been enabled,
press play on the device.
» The TV will automatically switch to
the correct signal source.
Using One-touch Standby
1 Press (Standby/On) on the remote
control.
» The TV and all connected HDMI
devices will automatically enter
standby mode.
• Select [SETUP] > [Aspect Ratio].
• Select a aspect ratio.
• Press OK to conrm.
Using HDMI CEC
Making full use of your HDMI-CEC
compatible devices can enhance control
features to achieve the best possible
results. HDMI-CEC compatible devices
connected through the HDMI connector
can be controlled by a TV remote control.
To enable HDMI CEC, you will need to:
• Connect two or more HDMI-CEC
compatible devices using HDMI
connections.
• Make sure that each HDMI-CEC
compatible device is operating
normally.
• Switch to HEMI CEC.
Note
• HDMI CEC compatible devices must be
switched on and selected as a signal source.
• Philips does not guarantee 100%
interoperability with all HDMI-CEC devices.
Bekijk gratis de handleiding van Philips 40PFT5708, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philips |
| Model | 40PFT5708 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 2821 MB |
