Handleiding
Je bekijkt pagina 21 van 32
Copyright © 2024, Fast ČR, a. s. Revision 04/2024
EN - 19
E6 High temperature of IGBT.
Wait for the temperature of IGBT return to
normal.
Touch “ON/OFF” button to restart unit.
Check whether the fan runs smoothly; if
not , replace the fan.
E7 Supply voltage is below the rated voltage. Please inspect whether power supply is
normal.
Power on after the power supply is normal.
E8 Supply voltage is above the rated voltage.
U1 Communication error.
Reinsert the connection between the
display board and the power board.
Replace the power board or the display
board.
2) Specic Failure & Solution
Failure Problem Solution A Solution B
The LED does not come on
when unit is plugged in.
No power supplied. Check to see if plug
is secured tightly in
outlet and that outlet is
working.
The accessorial power
board and the display
board connected failure.
Check the connection.
The accessorial power
board is damaged.
Replace the accessorial
power board.
The display board is
damaged.
Replace the display
board.
Some buttons can’t work, or
the LED display is not normal.
The display board is
damaged.
Replace the display
board.
The Cooking Mode Indicator
comes on, but heating does
not start.
High temperature of
the hob.
Ambient temperature
may be too high. Air
Intake or Air Vent may
be blocked.
There is something
wrong with the fan.
Check whether the fan
runs smoothly;
if not, replace the fan.
The power board is
damaged.
Replace the power
board.
Bekijk gratis de handleiding van Philco PHD 640 EP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philco |
| Model | PHD 640 EP |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2645 MB |