Handleiding
Je bekijkt pagina 20 van 32
Copyright © 2024, Fast ČR, a. s. Revision 04/2024
EN - 18
Problem Possible causes What to do
The induction hob
or a cooking zone
has turned itself o
unexpectedly, a tone
sounds and an error
code is displayed
(typically alternating
with one or two digits
in the cooking timer
display).
Technical fault. Please note down the error letters
and numbers, switch the power to
the induction hob o at the wall, and
contact a qualied technician.
8. FAILURE DISPLAY AND INSPECTION
The induction hob is equipped with a self diagnostic function. With this test the technician is able to check
the function of several components without disassembling or dismounting the hob from the working
surface.
Troubleshooting
1) Failure code occur during customer using & Solution;
Failure code Problem Solution
Auto-Recovery
E1
Ceramic plate temperature sensor failure-
-open circuit.
Check the connection or replace the
ceramic plate temperature sensor.E2
Ceramic plate temperature sensor failure-
-short circuit.
Eb Ceramic plate temperature sensor failure
E3 High temperature of ceramic plate sensor.
Wait for the temperature of ceramic plate
return to normal.
Touch “ON/OFF” button to restart unit.
E4
Temperature sensor of the IGBT failure
--open circuit.
Replace the power board.
E5
Temperature sensor of the IGBT failure
--short circuit
Bekijk gratis de handleiding van Philco PHD 640 EP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philco |
| Model | PHD 640 EP |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2645 MB |