Philco PDI 1049 BBIT handleiding
Handleiding
Je bekijkt pagina 9 van 52
Copyright © 2024, Fast ČR, a. s. Revision 08/2024
EN - 7
PART 3: USING YOUR DISHWASHER
Before using your dishwasher:
Inside Outside
1. Set the water softener
2. Loading the salt Into the softener
3. Loading the basket
4. Fill the detergent dispenser.
Please check the “Water Softener”, if you need to set the water softener.
Loading The Salt Into The Softener
NOTE:
If your model does not have any water softener, you may skip this section.
Always use salt intended for dishwasher use.
The salt container is located beneath the lower basket and should be lled as explained in the following:
WARNING:
x
Only use salt specically designed for dishwashers use!
Every other type of salt not specically designed for dishwasher use, especially table salt, will damage the
water softener. In case of damages caused by the use of unsuitable salt the manufacturer does not give
any warranty nor is liable for any damages caused.
x Only ll with salt before running a cycle.
This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of
the machine for any period of time, which may cause corrosion.
Bekijk gratis de handleiding van Philco PDI 1049 BBIT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philco |
| Model | PDI 1049 BBIT |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 3875 MB |
