Philco PDI 1049 BBIT handleiding
Handleiding
Je bekijkt pagina 10 van 52
Copyright © 2024, Fast ČR, a. s. Revision 08/2024
EN - 8
Please follow the steps below for adding dishwasher salt:
1. Remove the lower basket and unscrew the reservoir cap.
2. Place the end of the funnel (if supplied) into the hole and pour in about 1.5 kg of dishwasher salt.
3. Fill the salt container to its maximum limit with water, It is normal for a small amount of water to come
out of the salt container.
4. After lling the container, screw back the cap tightly.
5. The salt warning light will turn o after the salt container has been lled with salt.
6. Immediately after lling the salt into the salt container, a washing program should be started (We
suggest to use a short program). Otherwise the lter system, pump or other important parts of the
machine may be damaged by salty water. This is out of warranty.
NOTE:
x
The salt container must only be relled when the salt warning light (
) in the control panel comes on.
Depending on how well the salt dissolves, the salt warning light may still be on even though the salt
container is lled.
x If there is no salt warning light in the control panel (for some models), you can estimate when to ll the
salt into the softener by the cycles that the dishwasher has run.
x If salt has spilled, run a soak or quick program to remove it.
Bekijk gratis de handleiding van Philco PDI 1049 BBIT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philco |
| Model | PDI 1049 BBIT |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 3875 MB |
