Perfect Aire 2PHG7500 handleiding
Handleiding
Je bekijkt pagina 5 van 12
5
MAXIMUM MOUNTING HEIGHT USING BRACKET FOR:
MOUNTING AND OPERATING
Figure 1
NOTE: Diagram is not drawn to scale, for information purposes only.
NOTE: Product dimensions are approximate
and subject to change without notice.
HORIZONTAL / ANGLED AIR FLOW:
The maximum recommended ceiling height
for eective vertical air ow is 8 ft.
WARNING
FOR INDOOR USE ONLY, IN A DRY
LOCATION FREE OF GASOLINE,
PAINT, FLAMMABLE LIQUIDS
OR COMBUSTIBLE DUST OR
MATERIALS.
DO NOT USE EXTENSION CORDS.
OPERATION AND TEMPERATURE
SETTING
1. This heater is designed to maintain a
comfortable room temperature. Always
operate the heater in the upright
position following all instructions and
recommendations listed in this manual.
When the heater is turned on by pressing the
POWER button, it will operate on HIGH setting
(7,500W) continuously.
The LED display panel will show the ambient
temperature.
Press the MODE button on either the unit or
remote to change the heat setting to LOW
(6,250W). The fan will start running about 5
seconds after initial start to push the heat out.
The sequence is HIGH-LOW-FAN-ONLY. To
operate the unit on FAN ONLY setting, press
the MODE button again. In FAN ONLY mode,
the LED display panel will show FA to indicate
the heater is in FAN ONLY mode. From FAN
ONLY mode, pressing the MODE button will
make the heater operate in HIGH setting again,
and the ambient temperature will appear on
the LED display.
Bekijk gratis de handleiding van Perfect Aire 2PHG7500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Perfect Aire |
| Model | 2PHG7500 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 2146 MB |
