Perfect Aire 2PAFP30 handleiding
Handleiding
Je bekijkt pagina 9 van 12
9
USAGE
TURNING HEATER OFF
Turn the ON/OFF Power Level/Fan Dial to the OFF position before unplugging
or plugging in the heater. Heater should be unplugged when not in use. To
disconnect heater, turn controls to OFF, then remove plug from outlet. Do not
wrap the cord around the unit tightly for storage, this will cause damage long
term to the cord.
TO OPERATE FAN ONLY
Turn the On/O Power Level Control dial to the Fan setting. Turn thermostat
fully clockwise so the fan will run continuously.
SAFETY FEATURES
This heater includes a visual alarm to warn that parts of the heater are getting
excessively hot. If the caution light comes on, immediately turn the heater o
and inspect for any objects on or adjacent to the heater that may cause high
temperatures. DO NOT OPERATE THE HEATER WITH THE CAUTION LIGHT ON.
The power indicator light, located near the power control, lights whenever
the heater is turned on. The heater is equipped with an automatic overheat
protection device located inside the body of the heater. If the heater grille is
obstructed, or if the heater gets too hot for any reason, the automatic overheat
protection device will turn the heater o. To reset the heater, simply turn power
o and unplug the heater for 10 minutes until it cools down and then you may
plug the heater in and restart. Be sure that the heater is on a smooth level
surface with no obstructions. The heater is also equipped with a safety tip-over
switch to turn power o to the heater when the heater tips over. To resume
heater functions simply stand heater upright.
(Continued)
Bekijk gratis de handleiding van Perfect Aire 2PAFP30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Perfect Aire |
| Model | 2PAFP30 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 1076 MB |
