Perfect Aire 2PAFP30 handleiding
Handleiding
Je bekijkt pagina 8 van 12
8
TURNING HEATER ON
To start the heater, turn the ON/OFF Power Level/Fan Dial from the OFF position
to the 1300 or 1500 watt setting. Then rotate the Thermostat Control clockwise
to the HIGH THERMOSTAT position as described below. (During the heaters
initial use, you may experience a slight odor or smoking. This is the result of the
heating element lubrication “burning o”. This is normal and will go away after
a few minutes of use).
POWER LEVEL SWITCH
This heater has two heat settings: 1300 and 1500 watts. Use the higher
setting (1500 watt) to raise the room temperature quickly. When the desired
temperature is reached use the lower 1300 watt setting. It is usually sucient
to maintain a comfortable temperature.
ADJUSTABLE THERMOSTAT WITH
ANTI-FREEZE SETTING
After heater has been turned on and the room has reached the desired
temperature, slowly rotate the thermostat knob counter-clockwise until the
heater shuts o (you should hear a faint “click”). By leaving the thermostat at this
setting it will automatically maintain this temperature. To lower temperature,
rotate the knob further counter-clockwise (towards the LOW position). To raise the
temperature, rotate the thermostat knob clockwise (towards the HIGH position).
When set to the Anti-Freeze setting, the Heater will turn on whenever the
temperature drops below 40°F, which is helpful to economically prevent ice
formation in garages and other unheated spaces.
USAGE (Continued)
CONTROL PANEL
Caution Light
Indicator
Thermostat
Knob
Power
Indicator Light
ON/OFF
Wattage Level
Fan Only
Anti-freeze
Setting
Bekijk gratis de handleiding van Perfect Aire 2PAFP30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Perfect Aire |
| Model | 2PAFP30 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 1076 MB |
