Perfect Aire 1PNC18000 handleiding
Handleiding
Je bekijkt pagina 10 van 24
7
STEP 2:
INSTALL TOP ANGLE AND
SIDE BRACKET
1. ([[HJOMVHTNHZRL[[V[VWHUNSLHIV]LOVSLZHZ
shown in Fig. 6 on previous page.
2. Install top angle and side retainers to cabinet, as
shown in Fig. 8. (10 screws)
FIG. 8
5/16 long
hex-head
STEP 3:
ASSEMBLE ACCORDION PANELS
7SHJLJHIPUL[VUÅVVYHILUJOVYH[HISL
2. Slide “
¹ZLJ[PVUVM^PUKV^ÄSSLYWHULSPU[VZPKL
retainer on the side of the cabinet. (See Fig. 9 and
Fig. 10.) Do this on both sides.
FIG. 9
FIG. 10
Accordion
Panel
Air Conditioner
Cabinet
Top
View
Plastic
Frame
Locking
Screw
Hole
Accordion
Panel
“
“ Section
Side Retainer
Plastic
Frame
0UZLY[[VWHUKIV[[VTSLNZVM^PUKV^ÄSSLYWHULS
frame into channel in the top angle and bottom rail.
Do this on both sides.
0UZLY[^HZOLYOLHKSVJRPUNZJYL^ZPU[V
OVSLZPU[VWSLNVMÄSSLYWHULSMYHTL:LLZ[LWVU
next page.) Do not totally tighten. Allow leg to slide
freely. Screws will be tightened after step 6.
STEP 4:
PLACE CABINET IN WINDOW
6WLU^PUKV^HUKTHYRJLU[LYVM^PUKV^ZPSS
(Fig. 11)
2. Place cabinet in window with bottom sill angle
ÄYTS`ZLH[LKV]LY^PUKV^ZPSSHZZOV^U)YPUN
window down temporarily behind top angle to hold
cabinet in place. (Fig. 12)
FIG. 12
FIG. 11
Sill
Angle
Sill
3. Shift cabinet left or right as needed to line up
JLU[LYVMJHIPUL[VUJLU[LYSPULTHYRLKVUZPSS
4. Fasten cabinet to window sill with 2 screws into
OVSLZ@V\TH`^PZO[VWYLKYPSSWPSV[OVSLZ
5. Add bottom rail seal over screw to window sill.
(See Fig. 13 on next page.)
Bekijk gratis de handleiding van Perfect Aire 1PNC18000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Perfect Aire |
| Model | 1PNC18000 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 4311 MB |
