Perfect Aire 1PHFP20 handleiding
Handleiding
Je bekijkt pagina 15 van 16
15
TROUBLESHOOTING
(Continued)
The room is not warming up or is warming up too slowly:
• Make sure the High Heat (1000W) setting is selected if you want the room
to heat faster. The Low Heat (500W) setting will heat more slowly but use
less energy.
• Verify that the Thermostat Knob (left-side knob) is turned fully clockwise to
the maximum setting when starting. If it’s set too low, the heater may not
provide enough heat.
• Double-check that both the Low Heat and High Heat switches are ON when
using High Heat Mode.
• Allow some time for the heater to warm up the room, especially if the room
is large, poorly insulated, or very cold.
• Conrm that the room is not too large for the heater’s capacity. This heater
is intended for supplemental heating, not as a primary heat source.
NOTICE: This heater is equipped with an overheat protection system. If
the unit overheats—due to blocked airow, restricted motor function, or
other issues—it will automatically shut o. After the unit has cooled down
completely, it can be restarted by turning all switches OFF, unplugging the unit
briey, and then turning it back on.
Bekijk gratis de handleiding van Perfect Aire 1PHFP20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Perfect Aire |
| Model | 1PHFP20 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 1486 MB |
