Perfect Aire 1PHFP20 handleiding
Handleiding
Je bekijkt pagina 11 van 16
11
MAINTENANCE
HOW TO USE THE HEATER
Use High Heat (1000W) to heat the room faster. If you prefer to save energy and
don’t mind a slower warm-up, you can use Low Heat (500W) instead.
NOTE: The HIGH/LOW switches only select the wattage (power level). The
room temperature is controlled by the left-side thermostat adjustment knob.
This heater is intended for supplemental heating only, not as a primary heat source.
Steps:
1. Select your desired wattage (HIGH or LOW).
2. Turn the left-side knob fully clockwise to the maximum setting.
3. Once the room reaches a comfortable temperature, slowly turn the left-side
knob counterclockwise just until you hear a soft click — this means the
heating element has turned o.
4. The heater will cycle on and o automatically to maintain the temperature
according to the set point you selected on the thermostat knob. This is part
of normal operation.
MAINTENANCE INSTRUCTIONS
1. Turn the ame switch (#4) to the OFF position.
2. Unplug the unit and allow it to cool down completely before cleaning.
3. To clean the glass door, use a clean, dry cloth to remove dust. For
ngerprints or smudges, use a slightly damp cloth.
4. To maintain the appearance of the heater, wipe the outer metal parts with a
soft, damp cloth.
5. After cleaning, wipe all surfaces with a dry, soft cloth.
6. Ensure the unit is completely dry before plugging it in and using it again.
Bekijk gratis de handleiding van Perfect Aire 1PHFP20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Perfect Aire |
| Model | 1PHFP20 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 1486 MB |
