PCE Instruments PCE-SCI-D handleiding
Handleiding
Je bekijkt pagina 6 van 10
6
PCE Instruments PCE Instruments | www.pce-instruments.com
9. Access the ‘Conguration system’
Key ‘SQ’ (<)
‘Conguration digits’
Key ‘UP’ (5)
UP SQ
‘CONFIGURATION SYSTEM’
• the ‘conguration digits’ indicate the active input signal range (see section 5)
• keys ‘UP’ (5) and ‘SQ’ (<) to congure the instrument (see section 10.2)
UP SQ
‘Conguration digits’
Opening the front cover reduces the security level. While front
cover is open :
• the isolation between accessible parts and power supply is
reduced from ‘reinforced’ to ‘basic’.
• accessible parts are part of the input signal circuit.
• operations must be performed by qualied operators.
When correctly connected, the input signal terminal prevents the
front cover from opening.
ACCESS THE ‘CONFIGURATION SYSTEM’
Step numbers as referenced at the image below.
1. Remove the input signal terminal
• make sure that there are no dangerous voltages at the output signal
terminals
2. Open the front cover
3. Congure the instrument
• locate the ‘conguration digits’
• locate the ‘UP’ (5) and ‘SQ’ (<) keys
BLOCK ACCESS TO THE ‘CONFIGURATION SYSTEM’
4. Close the front cover
• remove the input signal terminal (if it was placed)
5. Connect the input signal terminal
• when connected at place, check that the front cover can not be
opened
• if they were removed, connect the two output signal terminals
3
2
4
51
Bekijk gratis de handleiding van PCE Instruments PCE-SCI-D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PCE Instruments |
| Model | PCE-SCI-D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1821 MB |
