Handleiding
Je bekijkt pagina 34 van 35
32
If an abnormality comes up, the hob will enter the protective state
automatically and display corresponding protective codes:
Error Code for Induction hob
Problem
Possible causes
What to do
E1 Signal lost (PCB
failure)
Please contact after sales service.
E2/E3
Abnormal high/Low
input voltage
Stop cooking and wait until input
voltage back to normal. If not please
contact service center.
E4/E5/E6
Thermistor failure.
Please contact service center to repair.
E7
Abnormal high
temperature (dry
burning)
Cut off power, wait for 30min and
switch on.
If still not working, please contact
service.
E8/E9
Failure of IGBT
sensor
Please contact service center to repair.
E0 IGBT Overheat Check if the fan is still working. If not
please contact service center to repair.
EE
Display PCB failure.
Please contact service center.
The above are the judgment and inspection of common failures.
ATTENTION! To avoid danger, please do not disassemble the unit by
yourself!
6. ERROR CODE
Bekijk gratis de handleiding van Parmco HO33BI2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parmco |
| Model | HO33BI2 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2686 MB |
