Handleiding
Je bekijkt pagina 33 van 35
31
The induction
hob makes a
low humming
noise at some
certain power
setting.
This is caused by the technology of induction cooking.
This is normal, but the noise may quiet down or
disappear completely when you change the power level
setting.
Fan noise
coming from
the induction
hob.
A cooling fan is built in your induction hob which
prevent the electronics from overheating. It may
continue to run even after you’ve turned the induction
hob off. This is normal and needs no action. Do not
switch the power to the induction hob off at the wall
while the fan is running.
Pans do not
become hot and
appears in
the display.
The induction hob cannot detect the pan. Check the pan
base size, if it is too small for the cooking zone or not
properly centered. Use cookware suitable for induction
cooking. See section ‘Choosing the right cookware’.
Centre the pan and make sure that its base matches the
size of the cooking zone.
The induction
hob or a zone
turn itself off
unexpectedly.
A tone sounds
and error code
is displayed.
Technical fault.
Please note down the error code (typically alternating
with one or two digits in the cooking timer display).,
switch the power to the induction hob off at the wall,
and contact a qualified technician.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists,
please contact the shop you purchased the appliance at.
Bekijk gratis de handleiding van Parmco HO33BI2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parmco |
| Model | HO33BI2 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2686 MB |
