Handleiding
Je bekijkt pagina 26 van 35
24
2. Touch timer key (6), the digits “05” / “10” will show in the timer display.
and the “0” flashes.
3. Set the desired time in the control panel.
4. When the time is set, it will begin to count down immediately. The display
will show the remaining time.
NOTE: The red dot next to power level indicator (eg. ) will illuminate
indicating that the zone is in timer mode.
5. When cooking timer expires, the corresponding cooking zone will be switch
off automatically.
NOTE:
Other cooking zones will keep operating if they are turned on
previously.
If the timer is set on more than one zone:
1. When you set the time for several cooking zones simultaneously, decimal
dots of the relevant cooking zones are on. The minute display shows the
remaining time. The dot of the corresponding zone flashes.
2. Once the countdown timer expires, the corresponding zone will switch off.
Then it will show the remaining activated timer and the dot of corresponding
zone will flash.
3. To check the remaining time set on a particular zone, touch the zone (4) and
the corresponding timer will be shown in the timer indicator.
Cancel the timer
1. Select the zone that you want to cancel the timer.
2. Touch the timer key (6), the indicator will flash.
3. Set the timer to ”00”, the timer is cancelled.
COOKING GUIDELINES
Take care when frying as the oil and fat heat up very quickly,
particularly if you’re using Power Boost. At extremely high
temperatures oil and fat will ig- nite spontaneously and this presents a serious
fire risk.
NEVER try to extinguish a fire with water, but switch off the
appliance and then cover flame e.g. with a lid or a fire blanket.
Bekijk gratis de handleiding van Parmco HO33BI2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parmco |
| Model | HO33BI2 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2686 MB |
