Handleiding
Je bekijkt pagina 19 van 35
17
Check with an electrician whether the domestic wiring system is suitable
without alterations. Any alterations must only be made by a qualified
electrician.
1. If the cable is damaged or needs replacing, this should be done by an
after-sales technician using the proper tools, so as to avoid any accidents.
2. If the appliance is being connected directly to the mains supply, an
omnipolar circuit breaker must be installed with a minimum gap of 3mm
between the contacts.
3. The installer must ensure that the correct electrical connection has been
made and that it complies with safety regulations.
4. The cable must not be bent or compressed.
5. The cable must be checked regularly and only replaced by a proper qualified
person.
6. Your household power supply must meet the power consumption of the
appliance.
7. When the socket is not accessible for the user or a fixed electrical connection
of the appliance is required, an all-pole disconnecting device must be
incorporated during installation. Disconnecting devices are switches with a
contact opening distance of at least 3 mm. These include LS-switches, fuses
and protectors (EN 30335). Read the information on the nameplate and the
connection diagram before connecting the appliance to the mains. The
electricity supply must be performed via a 16A automatic cut-out. If in
doubt, always contact the local building authorities and consult the relevant
legal provisions.
Bekijk gratis de handleiding van Parmco HO33BI2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parmco |
| Model | HO33BI2 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2686 MB |
