Handleiding
Je bekijkt pagina 18 van 35
16
This hob can be connected only to a supply with system impedance no
more than 0.427 ohm. In case necessary, please consult your supply
authority for system impedance information.
Connecting the hob to the mains power supply
The power supply should be connected in compliance with the relevant
standard, or a single-pole circuit breaker. The method of connection is shown
as the diagram.
,Kϯϯ/Ϯ
This hob must be connected to the mains power supply only by a suitably
qualified person, who is familiar with and adheres to the local requirements and
supplementary regulations of your electricity supplier. Do not carry out the
installation yourself. RISK OF ELECTRIC SHOCK. Before connecting the
hob to the mains power supply, check that:
The domestic wiring system is suitable for the power drawn by the hob.
The voltage corresponds to the value given in the rating plate
The power supply cable sections can withstand the load specified on the
rating plate.
To connect the hob to the mains power supply, do not use adapters, reducers, or
branching devices, as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so
that its temperature will not exceed 75˚C at any point.
L N
Blue
Brown
Bekijk gratis de handleiding van Parmco HO33BI2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parmco |
| Model | HO33BI2 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2686 MB |
