Handleiding
Je bekijkt pagina 17 van 27
ɸ»² §±« ¸¿ª» º·²·¸»¼ ½±±µ·²¹
Touch the heating zone selection control that you wish to switch off
Turn the cooking zone off by scrolling down to “0”. Or press and hold button for heating area for 3
seconds, the heating zone stop working, and the button is off. Make sure the display shows “0”, then show
“H”.
Turn the whole cooktop off by touching the ON/OFF control.
Beware of hot surfaces “H” will show which cooking zone is hot to touch. It
will disappear when the surface has cooled down to a safe temperature. It can also be used as
an energy saving function if you want to heat more pans use the hotplates that are still hot.
Note: When “H” is shown on display, although the hob is off, but the temperature of induction glass is still very high,
do not let your fingers touch induction glass directly in case of scalds.
Note: After use, switch offthe hob element by its control and do not rely on the pan detector.
Ô±½µ·²¹ ¬¸» ݱ²¬®±´
You can lock the controls to prevent unintended use (for example children accidentally turning the
cooking zones on).
When the controls are locked, all the controls except the ON/OFF control are disabled. To lock the
controls: Touch the keylock control. The timer indicator will show “Lo”.
̱ «²´±½µ ¬¸» ½±²¬®±´
Make sure the Induction hob is turned on.
Touch and hold the keylock control for 3s
You can now start using your Induction hob.
When the hob is in the lock mode, all the controls are disabled except the ON/OFF, you can always turn the induction hob off
with the ON/OFF control in an emergency, but you must unlock the hob before the next operation.
Ѫ»®óÌ»³°»®¿¬«®» Ю±¬»½¬·±²
The temperature sensor will monitor the temperature inside the Induction hob. When an excessive temperature is
reached, “E3” or “E5” is shown on display, the hob will turn off, the internal cooling fan keeps running until internal
temperature is cooler, then the hob will re-start heating.
Ü»¬»½¬·±² ±º ͳ¿´´ ß®¬·½´»
When an unsuitable size or non-magnetic pan (e.g., aluminium), or some other small item (e.g., knife, fork, key) has
been left on the hob, the hob automatically goes on to standby in 1 minute. The fan will keep cooling down the
induction hob for a further 2 minutes.
ß«¬± ͸«¬¼±©² Ю±¬»½¬·±²
Auto shut down is a safety protection function for your induction hob. It shuts down automatically when you forget to turn
off your hob. The default working times for various power levels are shown in the below table:
When a pot is removed, the induction hob will stop heating immediately and the hob automatically switches off after 1minute.
16
Bekijk gratis de handleiding van Parmco FS600SI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parmco |
| Model | FS600SI |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3225 MB |
