Parkside PWDS 920 C3 handleiding
Handleiding
Je bekijkt pagina 10 van 48
PWDS 920 C3
GB
│
CY
│
7 ■
d) Take special care when working near corners,
sharp edges, etc. Do not allow the accessory
tool to bounce back from the workpiece or to
jam. The rotating accessory tool is more likely
to jam in corners or sharp edges or if it rebounds
off them. This can cause a loss of control or a
kickback.
e) Do not use chainsaw blades designed for
cutting wood, segmented diamond cutting
discs with a segment pitch greater than 10 mm
or any toothed saw blade. These kinds of
accessories often cause a kickback or loss of
control.
Additional safety instructions for
sanding with sandpaper
a) Use sanding sheets of the correct size, and
follow the manufacturer’s instructions for
selecting the sanding sheets. Sanding sheets
that protrude beyond the sanding plate can
cause injuries and lead to catching or tearing
of the sanding sheets or cause kickback.
Additional safety instructions
WARNING! Always wear safety
goggles.
WARNING! Always wear a dust
mask.
■ Unlock the On/Off switch and move it to the
off position if the power supply is interrupted,
e.g. due to a power failure or unplugging of
the mains plug. This prevents an uncontrolled
restart.
■ Use the power tool for dry sanding only.
Water entering a power tool will increase the
risk of electric shock.
■ Always switch on the electrical power tool
before applying it to the workpiece, and do
not switch it off until you have lifted it off the
workpiece.The power tool can move suddenly.
■ Do not use worn, torn or heavily clogged
sanding tools.Damaged sanding tools can
tear, fly off and injure someone.
■ Always use the supplied extraction hose or
a suitable dust extractor when operating the
power tool. The use of an extraction system
can reduce hazards caused by dust.
■ Attention! This could cause a fire! Avoid
overheating of the material being sanded as
well as the sander. Always empty the dust
collector before taking work breaks. Under
unfavourable conditions, sanding dust in the
dust sack, microfilter, paper sack (or in the filter
sack or filter of the vacuum cleaner) can ignite,
e.g. due to flying sparks when sanding metals.
This is a particular risk if the dust is mixed with
paint or polyurethane residues or other chemi-
cals and the workpiece has become hot after
being worked for a long time.
■ Hold the power tool firmly with both hands
when working, and ensure that you have
secure footing.The power tool is guided more
safely with two hands.
■ Wear ear muffs, goggles, dust mask and
gloves if necessary. Use a dust mask that is at
least a class FFP2 particle-filtering half mask.
■ Use a dust extractor when working on stone.
The vacuum cleaner must be approved for the
extraction of stone dust. Using these devices
reduces dust hazards.
■ Do not touch accessory tools until they have
cooled down. The accessory tools become
very hot when working.
■ Wear protective gloves when changing the
accessory tools. Accessory tools become warm
during prolonged use.
■ Do not process materials that release sub-
stances that are hazardous to health, e.g.
beech or oak wood dust, rock dust or asbestos.
These substances are considered carcinogenic.
■ Inform yourself about the applicable regula-
tions/laws concerning the handling of dust
hazardous to health in your country.
■ Never touch the running sanding tool. There is
a risk of personal injury.
■ If necessary, use a scaffold for working.
When working on a ladder, you cannot ensure
a secure footing.
Bekijk gratis de handleiding van Parkside PWDS 920 C3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PWDS 920 C3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5343 MB |
