Parkside PTS 20-Li B2 handleiding
Handleiding
Je bekijkt pagina 14 van 45
■ 10
│
GB
│
IE
│
NI
m) Keep the power cord away from any rotating
accessories. If you lose control of the appli-
ance, the power cord may get cut or caught
and your hand or arm could get caught in the
rotating accessory tool.
n) Never put the power tool down until the
accessory tool has come to a complete stand-
still. The rotating accessory tool could come
into contact with the surface and cause you to
lose control of the power tool.
o) Do not leave the power tool running whilst
carrying it. Accidental contact between your
clothing and the rotating accessory tool could
cause your clothing to get caught and the ac-
cessory tool to penetrate a part of your body.
p) Clean the ventilation slits of your power tool
regularly. The motor fan draws dust into the
housing, and a heavy accumulation of metal
dust can cause electrical hazards.
q) Do not use the power tool in the vicinity of
flammable materials. Sparks can ignite these
materials.
r) Do not use any accessory tools that require a
liquid coolant. The use of water or other liquid
coolants may lead to an electric shock.
Further safety instructions for abra-
sive cutting applications
Kickback and corresponding safety instruc-
tions
Kickback is a sudden reaction caused when a
rotating grinding disc catches or jams. Catching or
jamming causes the rotating accessory tool to stop
abruptly. If this happens, an uncontrolled power
tool turns rapidly against the direction of rotation of
the accessory tool caught in the blockage.
If, for example, a grinding disc catches or jams, the
edge of the grinding disc that is projecting into the
workpiece can get caught and break off the grinding
disc or cause a kickback. The grinding disc may
then jerk violently towards or away from the opera-
tor, depending on the rotation direction of the disc
at the blockage. This can also cause grinding discs
to break.
Kickbacks are caused by improper or incorrect use
of the power tool. This can be avoided by taking
proper precautions as described below.
a) Hold the power tool firmly in both hands and
position your body and arms so they can
absorb the force of the kickback. Always use
the additional handle, if available, so that
you have the maximum possible control over
the kickback force or reaction forces at full
speed. By taking adequate precautions, the
operator can stay in control of the kickback and
reaction forces.
b) Keep your hands clear of a rotating accesso-
ry tool at all times. The accessory tool could
move over your hand in the event of a kickback.
c) Avoid the area in front of and behind the
rotating cutting disc. The kickback will force
the power tool in the opposite direction to the
direction of rotation of the grinding disc at the
blockage.
d) Take special care when working near cor-
ners, sharp edges, etc. Do not allow the
accessory tool to bounce back from the work-
piece or to jam. The rotating accessory tool is
more likely to jam in corners or sharp edges or
if it rebounds off them. This can cause a loss of
control or a kickback.
Bekijk gratis de handleiding van Parkside PTS 20-Li B2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PTS 20-Li B2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4492 MB |
