Parkside PTS 20-Li B2 handleiding
Handleiding
Je bekijkt pagina 13 van 45
GB
│
IE
│
NI
│
9 ■
Safety instructions for abrasive saws
a) The blade guard, which is a part of the power
tool, must be attached securely and set in a
way that ensures maximum safety, i.e. the
smallest possible amount of the grinding tool
is exposed to the operator. Ensure that you
and anyone else in the vicinity remain out of
the plane of the rotating grinding disc. The
blade guard is designed to protect the operator
from fragments and accidental contact with the
grinding tool.
b) Use only diamond-coated cutting discs for
your power tool. Just because you can attach
the accessories to your power tool, does not
ensure they are safe to use.
c) The maximum permissible speed of the acces-
sory tool being used must be at least as high
as the maximum speed specified for the power
tool. Accessories that rotate faster than the per-
missible rate can break and throw pieces into
the air.
d) Grinding tools should only be used for the
recommended applications.
For instance, never grind with the side surface
of a cutting disc. Cutting discs are designed to
remove material with the edge of the disc. Any
lateral application of force on these grinding
tools can cause them to break.
e) Always use undamaged clamping flanges of
the correct size and shape for the grinding
disc you have selected. Suitable flanges sup-
port the grinding disc and reduce the risk of a
disc breakage.
f) Do not use worn grinding discs from larger
power tools. Grinding discs for larger power
tools are not designed for the higher rotational
speeds of smaller power tools and can break.
g) The external diameter and thickness of the ac-
cessory tool being used must comply with the
dimensions of your power tool. Incorrectly di-
mensioned accessory tools cannot be sufficient-
ly shielded or controlled.
h) Grinding discs and flanges must fit exactly
onto the grinding spindle of your power tool.
Accessory tools which do not fit precisely on the
grinding spindle of the power tool will rotate un-
evenly, vibrate severely and can lead to a loss
of control.
i) Do not use damaged grinding discs. Check
the grinding discs before each use for chips
and cracks. If the power tool or grinding disc
is dropped, check to see if either is damaged,
or use an undamaged grinding disc. After
checking and inserting the grinding disc, en-
sure that you and any other people in the vi-
cinity remain out of the plane of the rotating
grinding disc and allow the appliance to ro-
tate at maximum speed for one minute. Dam-
aged grinding discs usually break during this
test period.
j) Wear personal protective equipment.
Depending on the application, ensure that
you use full face protection, eye protection
or safety goggles. If required, use a dust
mask, ear muffs, protective gloves or a spe-
cial apron to protect you from grindings and
material particles. Protect your eyes from fly-
ing debris that may be created during certain
applications. Dust or filter masks must be used
to filter any dust produced by the application.
Long-term exposure to loud noise can cause
hearing loss.
k) Ensure that any bystanders are at a safe dis-
tance from your work area. Anyone who en-
ters the workspace must wear personal pro-
tective equipment. Fragments of the workpiece
or broken accessory tools can fly off and cause
injury – even outside of the immediate working
area.
l) Hold the appliance only by the insulated han-
dles if you are carrying out any work during
which the attached tool could contact hidden
power cables. Contact with a live cable may
also cause metal parts of the tool to become
live and could result in an electric shock.
Bekijk gratis de handleiding van Parkside PTS 20-Li B2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PTS 20-Li B2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4492 MB |
