Parkside PSTDA 20-Li C3 handleiding
Handleiding
Je bekijkt pagina 6 van 64
GB
IE
NI
6
25Splinter guard
26Holder (Hex key)
27Hex key
28Charger
29Battery
30Charge level indicator
31Button (Charge level indicator)
32Battery release
33Storage case
Description of functions
With the jigsaw, the saw blade clamped
on one side cuts via a stroke movement.
With the pendulum stroke, the guide roller
moves the saw blade forwards during
every upstroke in addition to the vertical
saw movement.
Please refer to the descriptions below for
information on how the operating ele-
ments work.
Technical data
Cordless Jigsaw ....PSTDA 20-Li C3
Rated voltage U .............................20V ⎓
Weight with battery (20 V ;2 Ah)) ..2.3kg
Idle stroke rate ....................0–2700 min
−1
Stroke length ....................................20mm
Cutting depth
– wood .........................................≤80mm
– Aluminium .................................≤12mm
– metal ............................................≤5mm
Bevel cutting
...........−45°; −22.5°; 0°; 15°; 30°; 45°
Sound pressure level (L
pA
)
....................................84.51 dB; K
pA
=5dB
Sound power level (L
WA
)
–Measured .............92.51 dB; K
WA
=5dB
Vibration (a
h
)
– wood ..............2.709 m/s²; K=1.5m/s²
– metal ..............2.540 m/s²; K=1.5m/s²
Temperature ...................................≤50 °C
– Charging ................................4 – 40°C
– Operation .........................−20 – 50°C
– Storage ..................................0 – 45°C
PARKSIDE Performance Smart battery
Smart PAPS 204 A1/Smart PAPS 208 A1
–frequency band ....2400–2483.5 MHz
–transmitted power ...................≤ 20 dBm
Levels of noise and vibration were determ-
ined according to the standards and regu-
lations in the declaration of conformity.
The specified total vibration value and the
stated noise emission value have been
measured according to a standardised
test method and can be used to compare
one power tool with another. The specified
total vibration value and the stated spe-
cified noise emission value can also be
used for a provisional assessment of the
load.
WARNING! The vibration and noise
emissions may deviate from the specified
values during actual use of the power tool,
depending on how the power tool is be-
ing used. Try to keep the exposure to vi-
brations as low as possible. An example
of a measure to reduce vibration exposure
is limiting the working hours. All parts of
the operating cycle have to be considered
while doing so (for example, times when
the power tool is switched off and times
when it is switched on but running without
any load).
Charging time
The device is part of the X20VTEAM
series and can be operated with bat-
teries of the X20VTEAM series. Bat-
teries of the X20VTEAM series may
only be charged using chargers of the
X20VTEAM series.
We recommend that you operate
this appliance with the following bat-
Bekijk gratis de handleiding van Parkside PSTDA 20-Li C3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PSTDA 20-Li C3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2114 MB |
