Parkside PSHP 1 A1 handleiding
Handleiding
Je bekijkt pagina 12 van 37
12 GB/IE/NI
Table to adjust the darkening levels
Arc current (Amps)
1.5 6 10 15 30 40 60 70 100 125 150 175 200 225 250 300 350 400 450 500 600
Grind
Grinding function – auto-darkening is not active
SMAW 8 9 10 11 12 13 14
MAG 8 9 10 11 12 13 14
TIG/
GTAW
8 9 10 11 12 13
MIG
(heavy)
9 10 11 12 13 14
MIG
(light)
10 11 12 13 14
PAC 9 10 11 12 13
PAW 4 5 6 7 8 9 10 11 12
SMAW: Welding with coated
electrodes
MAG: Welding with metal active gas
PAC: Plasma cutting
PAW: Plasma welding
Grind: Grinding function: Auto-darkening
is not active. Only use the setting
if you are not using the welding
helmet for welding.
MIG (heavy): MIG welding of heavy
metals
MIG (light): MIG welding of light metals
and alloys
TIG/GTAW: Inert gas welding
Before using the welding helmet each
time, you must check that the protective
screen as well as the helmet is intact.
If the protective screen should show signs
of scratches, cracks or unevenness, then it
is essential that it is replaced before use, as
otherwise this could lead to serious injuries.
Remove the protective fi lm from the inside
and outside of the visor.
Adjust the welding helmet with the help
of the headband
5
. Turn the rear control
dial on the headband
6
in order to
adapt the welding helmet to the respec-
tive head size and the lateral control
dials on the headband
7
to lock the
welding helmet. During the set-up, make
sure the welding helmet is positioned as
low as possible on the head and as close
as possible to your face.
Before carrying out welding work, set the
appropriate darkening level.
The darkening level can be set manually
between 5 and 9 and between 9 and
13, by turning the darkening control
9
on the outside of the helmet.
Using the darkening switch
17
you can
set whether the darkening will be set
between levels 5–9 or 9–13 on the
darkening control
9
.
ATTENTION! The darkening switch
17
has a “Grind” adjustment position. If the
darkening switch
17
is set to this position,
then auto-darkening is deactivated. Only use
the setting if you do not want to use welding
helmet for welding. Auto-darkening is then
not active.
Prior to each use check the light seal.
Bekijk gratis de handleiding van Parkside PSHP 1 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PSHP 1 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3813 MB |
