Parkside PRM 1800 C3 handleiding
Handleiding
Je bekijkt pagina 21 van 49
Problem Potential
cause
Remedy
Cuttings remain on
the ground
The cuttings collec
tion bag
7
is
overfilled or the
discharge chute is
blocked.
Empty the cuttings
collection bag
7
and remove
cuttings from the
discharge chute.
Grass too wet. Let the lawn dry.
● Storage
NOTE!
Improper storage of the device can result in
damage.
■ Let the device dry before storing it. Residual moisture
and cuttings remaining in the device can lead to
mould formation.
- Thoroughly clean the device (see “Cleaning”).
- Store the device in a clean, dry, frost-protected
place out of the reach of children.
- Store the device in a location away from sunlight
and other heat sources.
- Always store device parts and accessories together
with the device.
- Store the device and accessories at a temperature
between +5 °C and +20 °C.
● Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
Note the labels of the packaging
materials when sorting the waste.
These list the abbreviation (a) and
number (b) with the following
meaning:
1-7: plastics; 20-22: paper and cardboard;
80-98: composites.
The icon with the crossed-out waste bin indi
cates that electrical and electronic equipment
must not be disposed of in the household
waste. Consumers are obligated by law to
dispose of obsolete electrical and electronic equipment
separate from unsorted household waste. This ensures
environmentally friendly and resource-saving disposal.
Batteries and rechargeable batteries that are not perma
nently installed in electrical and electronic equipment
and can be removed without destruction must be sepa
rated from such devices and disposed of properly before
turning the device over to a collection point. The same
applies for illuminants that can be removed from the
device without destruction.
Private owners of electrical and electronic devices can
dispose of these at municipal collection points. The
disposal of obsolete devices is free of charge.
This free take-back obligation applies if the device has
been purchased at a store or delivered to a home
address. The place of performance of the take-back obli
gation is the same as the place of performance of the
delivery. Transport charges may not be invoiced for the
returned devices.
In general, distributors are obligated to ensure the free
take-back of obsolete devices through suitable collection
points within a reasonable distance.
Consumers can return obsolete devices to a take-back
distributor if purchasing a new device of the same type
with essentially the same function. This also applies to
home deliveries. In distance selling, the free pick-up of an
obsolete device when purchasing a new device is
restricted to heat exchangers, visual display units and
large devices with an outer edge length of more than 50
cm. The seller has to ask the consumer about their inten
tion to return the obsolete device at the time the sales
agreement is concluded. Apart from this, consumers can
dispose of up to three obsolete devices of the same type
at the seller's collection point free of charge without
having to purchase a new device. However, the edge
length of the respective devices must not exceed 25 cm.
● Spare parts/accessories
Please use the contact form if you are having issues with
the ordering process.
Contact the "Service Center" if you have any further
questions.
Blades
(Position 2 in exploded drawing)
SMV1491215
GB/IE/NI 21
Troubleshooting / Storage / Disposal / Spare parts/accessories
Bekijk gratis de handleiding van Parkside PRM 1800 C3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PRM 1800 C3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4989 MB |
