Parkside PRM 1800 B2 handleiding
Handleiding
Je bekijkt pagina 12 van 44
12
GB IE NI
Many accidents are caused by
poorly maintained equipment.
• Check that only replacement
tools authorised
by the manu-
facturer are used.
• During maintenance of the cut-
ting blades, be aware that they
can be brought into motion
even when the power supply is
switched off.
• Worn or damaged information
signs must be replaced.
• Replace worn or damaged
parts for safety reasons. Use
only original spare parts and
accessories.
• Allow the motor to cool down
before you put the machine into
storage. Risk of burns!
Electrical Safety:
• Ensure that the mains voltage
matches the specifi cations on
the rating plate.
• Connect the equipment only to
a socket that has a
RCD (Resi-
dual Current Device) with a trip
current of no more than 30 mA.
• Avoid bodily contact with
earthed parts (e.g. metal
fences, metal posts). There is an
increased risk of electric shock
if your body is earthed.
• Use only authorised power cables
of H05RN-F, which are no more
than 75m long and suitable for
outdoor use. The power cable
wire cross section must be at least
2.5 mm
2
. Always completely
unroll cable drums before use.
Check the cable for damage.
• To fi x on the power cable, use
the cable suspension intended
for the purpose.
• Keep the power cable away
from the cutting tool when work-
ing. The cutting blades may
damage the power cable and
result in contact with live parts.
Always run the power cable be-
hind the operator.
The extension cable can be
accidentally severed. Risk of
electric shock!
• Do not use the power cable to
pull the plug from the socket.
Protect
the power cable from
heat, oil and sharp edges.
• Switch off the equipment and
disconnect the plug from the
socket if the power cable is
damaged. If the power cable is
damaged, it must be replaced
by the manufacturer, the cus-
tomer services of the same, or
a qualifi ed person, in order to
avoid hazards.
• Do not connect a damaged
power cable to the mains. Do not
touch a damaged power cable
when it is connected to the mains.
A damaged power cable may
result in contact with live parts.
Residual risks
Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this elec-
tric tool may present the following hazards:
a) Injuries caused by moving parts;
b) Ear damage if working without ear
protection;
c) Lung damage, if suitable respiratory
protection is not worn;
d) Damage to your health caused by
swinging your hands and arms when
Bekijk gratis de handleiding van Parkside PRM 1800 B2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PRM 1800 B2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6462 MB |
