Parkside PPWSA 12 A1 handleiding
Handleiding
Je bekijkt pagina 12 van 228
PPWSA 12 A1
GB
│
IE
│
7 ■
Fragments of the workpiece or broken accessory
tools can fly off and cause injury – even outside
the immediate work area.
k) Hold the power tool only by the insulated
handles when you are carrying out work in
which the accessory tool may come into con-
tact with concealed power cables. Contact
with a live cable may also cause metal parts of
the tool to become live and could result in an
electric shock.
l) Never put the power tool down until the
accessory tool has come to a complete stand-
still. The rotating accessory tool could come
into contact with the surface and cause you
to lose control of the power tool.
m) Do not leave the power tool running whilst
carrying it. Accidental contact between your
clothing and the rotating accessory tool could
lead to an injury (for example, a cut or puncture
wound).
n) Clean the ventilation slits of your power tool
regularly. The motor fan draws dust into the
housing, and a heavy accumulation of metal
dust can cause electrical hazards.
o) Do not use the power tool in the vicinity of
flammable materials. Sparks can ignite these
materials.
p) Do not use any accessory tools that require a
liquid coolant. The use of water or other liquid
coolants may lead to an electric shock.
Safety instructions for abrasive
cutting machines
a) The blade guard, which is a part of the power
tool, must be attached securely and set in a way
that ensures maximum safety, i.e. the smallest
possible amount of the grinding tool is exposed
to the operator. Ensure that you and anyone
else in the vicinity remain out of the plane of
the rotating grinding disc. The blade guard is
designed to protect the operator from fragments
and accidental contact with the grinding tool.
b) Use only reinforced bonded or diamond-
coated cutting discs for your power tool. Just
because you can attach the accessories to your
power tool, does not ensure they are safe to use.
c) The maximum permissible speed of the acces-
sory tool being used must be at least as high
as the maximum speed specified for the power
tool. Accessories that rotate faster than the per-
missible rate can break and throw pieces into
the air.
d) Grinding tools should only be used for the
recommended applications. For example:
Never grind with the side surface of a cutting
disc. Cutting discs are designed to remove
material with the edge of the disc. Any lateral
application of force on these grinding tools can
cause them to break.
e) Always use undamaged clamping flanges of
the correct size and shape for the grinding
disc you have selected. Suitable flanges sup-
port the grinding disc and reduce the risk of a
disc breakage.
f) Do not use worn grinding discs from larger
power tools. Grinding discs for larger power
tools are not designed for the higher rotational
speeds of smaller power tools and can break.
g) The external diameter and thickness of the
accessory tool being used must comply with
the specified dimensions of your power tool.
Incorrectly dimensioned accessory tools cannot
be sufficiently shielded or controlled.
h) Grinding discs and flanges must fit exactly
onto the grinding spindle of your power tool.
Accessory tools which do not fit precisely on the
grinding spindle of the power tool will rotate
unevenly, vibrate severely and can lead to a
loss of control.
i) Do not use damaged grinding discs. Check
the grinding discs before each use for chips
and cracks. If the power tool or grinding disc
is dropped, check to see if either are dam-
aged or use an undamaged grinding disc.
After checking and inserting the grinding
disc, ensure that you and any other people in
the vicinity remain outside of the plane of the
rotating grinding disc and allow the appli-
ance to rotate at maximum speed for one
minute. Damaged grinding discs usually break
during this test period.
Bekijk gratis de handleiding van Parkside PPWSA 12 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PPWSA 12 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25421 MB |
