Parkside PPWSA 12 A1 handleiding
Handleiding
Je bekijkt pagina 11 van 228
PPWSA 12 A1
■ 6
│
GB
│
IE
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries.
Protect the rechargea-
ble battery from heat (for example, from
continuous exposure to sunlight), fire, water
and moisture. There is a risk of explosion.
6. Service
a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained.
b) Never try to repair damaged batteries.
Maintenance of batteries should only be
carried out by the manufacturer or an
approved customer service centre.
Safety instructions for all applica-
tions
General safety instructions for abrasive
cutting
a) This power tool is designed to be used as an
abrasive cutting machine. Read all the safety
information, instructions, diagrams and data
that you receive with the appliance. Failure to
follow all of the instructions below may result in
electric shock, fire and/or serious injury.
b) This power tool is not suitable for grinding,
sandpaper sanding, working with steel
brushes, cutting holes or polishing. Using the
power tool for applications for which it is not
designed can lead to hazards and injuries.
c) Do not use the power tool for any function for
which it is not expressly designed and intended
by its manufacturer. Such a conversion can
result in loss of control and serious bodily injury.
d) Do not use accessories that are not specifically
designed and specified by the manufacturer
for this power tool. Just because you can
attach the accessories to your power tool, does
not ensure they are safe to use.
e) The maximum permissible speed of the acces-
sory tool being used must be at least as high
as the maximum speed specified for the power
tool. Accessory tools that rotate faster than the
permissible rate can break and throw pieces
into the air.
f) The external diameter and thickness of the
accessory tool being used must comply with
the specified dimensions of your power tool.
Incorrectly dimensioned accessory tools cannot
be sufficiently shielded or controlled.
g) The dimensions for fastening the accessory
tool must match the dimensions of the fasten-
ers of the power tool.
Accessory tools that cannot be fitted precisely
onto the power tool will rotate unevenly, vibrate
severely and can lead to a loss of control.
h) Never use damaged accessory tools. Before
each use, check accessory tools such as
grinding discs for chips or cracks, grinding
plates for cracks, scuffs or excessive wear
and tear and wire brushes for loose or broken
wires. If the power tool or the accessory tool
in use is dropped, check to see if it is dam-
aged or use an undamaged accessory tool.
When you have checked and inserted the
accessory tool, ensure that you and any other
people in the vicinity remain outside of the
plane of the rotating accessory tool and
allow the appliance to rotate at maximum
speed for one minute. Damaged accessory
tools usually break during the test period.
i) Wear personal protective equipment. Depend-
ing on the application, ensure that you use full
face protection, eye protection or safety goggles.
Use a dust mask, hearing protection, protec-
tive gloves or special apron to protect yourself
from grindings and material particles as
required. Protect your eyes from flying debris
that may be produced during certain applica-
tions. Dust or filter masks must be used to filter
any dust produced by the application. Long-term
exposure to loud noise can cause hearing loss.
j) Ensure that any bystanders are at a safe
distance from your work area. Anyone who
enters the workspace must wear personal
protective equipment.
Bekijk gratis de handleiding van Parkside PPWSA 12 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PPWSA 12 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25421 MB |
