Parkside PNKP 105 C2 handleiding
Handleiding
Je bekijkt pagina 9 van 166
PNKP 105 C2
■ 6
│
GB
│
IE
Original accessories/auxiliary equipment
♦ Only use the accessories and additional equipment that are
specified in the operating instructions and compatible with the
appliance.
Operation
Preparing the surfaces to be glued
■ Do not use flammable solvents to clean the surfaces to be glued.
■ The ambient temperature and the materials to be bonded may
not be colder than 5°C and not warmer than 50°C.
■ The area to be glued must be clean, dry and free of grease.
♦ Smooth surfaces should be roughened before gluing.
♦ Quick-cooling materials such as steel should be warmed a little
tofacilitate adhesion.
1. Fold out the stand 4. Put down the appliance.
2. Push a glue stick 7 into the feeder shaft 1.
3. Allow the appliance heat up for about 5 minutes.
The appliance is now ready for use.
Bekijk gratis de handleiding van Parkside PNKP 105 C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PNKP 105 C2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9686 MB |
