Parkside PNKP 105 C2 handleiding
Handleiding
Je bekijkt pagina 10 van 166
PNKP 105 C2
GB
│
IE
│
7 ■
Preparing the surfaces to be glued
♦ Pull the trigger 3 to regulate the flow of glue in accordance with
your requirements.
1. Apply the glue in spots. For flexible materials, such as textiles,
apply the glue in zigzag lines.
2. Press the two workpieces to be bonded together immediately
after applying the glue and hold for about 30 seconds. The
glued bond is ready after about 5 minutes.
3. During breaks in work, put the glue gun down on the stand4.
Switching the appliance off
♦ Unplug the appliance from the mains socket.
140
The nozzle 5 reaches a temperature of over 140°C.
Maintenance and cleaning
WARNING! Always remove the power plug from the
power socket before cleaning the appliance!
■ The low-temperature glue gun is maintenance-free.
■ Keep the appliance clean and dry at all times.
■ Never permit liquids to enter inside the appliance. Use a cloth to
clean the housing. Never use petrol, solvents or cleansers which
can damage plastic.
Bekijk gratis de handleiding van Parkside PNKP 105 C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PNKP 105 C2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9686 MB |
