Parkside PMTS 180 B2 handleiding
Handleiding
Je bekijkt pagina 14 van 36
PMTS 180 B2
GB
│
IE
│
NI
│
11 ■
♦ Swing the pendulum cover
back completely
and hold it firmly in place with your hand.
♦ Press the spindle lock
all the way down and
hold it in this position. If necessary, rotate the
cutting disc by hand until this is possible.
♦ Use the hex key supplied (large)
to unscrew
the fixing screw
out in an anticlockwise
direction.
♦ Remove the plane washer
, the clamping
flange (outside)
and the cutting disc
.
♦ Insert a new cutting disc.
♦ Proceed in reverse order in order to reassemble
the appliance to a usable condition.
♦ Check whether all the fastening elements are
correctly fitted.
NOTE
► Ensure that the cutting disc
can be rotated
freely.
► Switch the appliance on for around 60seconds
to check that there are no unusual vibrations.
If this is not the case, you should check that
the cutting disc is installed correctly
.
Clamping the workpiece
You can clamp the workpiece and adjust the mitre
angle with the aid of the fitted vice.
Using the vice
♦ Turn the handle on the vice
clockwise to
clamp the workpiece.
♦ Turn the handle on the vice
anticlockwise to
unclamp the workpiece.
NOTE
► You can also fold the rapid adjustment
upwards in order to make a quick adjustment
to the vice
. Fold the rapid adjustment
down again in order to fix the vice . After
this, use the vice handle to make fine
adjustments.
Setting the cutting angle (mitre angle)
♦ Undo the cutting angle adjustment
by turning
it anticlockwise. If necessary, pull the cutting
angle adjustment
upwards.
♦ Set the required cutting angle using the angle
given.
♦ Retighten the cutting angle adjustment
by
turning it clockwise.
Cleaning and maintenance
WARNING! RISK OF INJURY!
► Always remove the power plug from the
wall socket before carrying out any work on
the appliance.
■ The appliance must always be kept clean, dry
and free from oil or grease.
■ Use a soft, dry cloth to clean the housing.
■ Clean the ventilation slits in your power tool
with a soft brush regularly.
NOTE
► Replacement parts not listed (such as carbon
brushes, switch) can be ordered via our
service hotline.
► Required maintenance work should only be
replaced by qualified service personnel.
Bekijk gratis de handleiding van Parkside PMTS 180 B2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PMTS 180 B2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3636 MB |
