Parkside PMTS 180 B2 handleiding
Handleiding
Je bekijkt pagina 13 van 36
PMTS 180 B2
■ 10
│
GB
│
IE
│
NI
Original accessories/auxiliary
equipment
■ Use only the additional equipment and accesso-
ries specified in the operating instructions. Using
attachments or accessory tools other than those
recommended in the operating instructions can
lead to a risk of injury.
Before use
Setting up the appliance
Fix the appliance using suitable bolts (not included
in delivery) to a flat, stable base. Use the drill
holes for this purpose. Ensure that a mains
socket is within easy reach.
NOTE
► In exceptional cases you can position the
baseplate for this process on a solid support.
Removing/inserting transport
safetydevices
Removing transport safety devices
♦ Apply a little pressure to the handle
and
pull the transport safety device
out. The
motor unit
can now be moved upwards.
Inserting transport safety devices
♦ Press the handle
downwards and push the
transport safety device
into the appliance.
The motor unit
is now fixed.
NOTE
► Use the transport safety device for trans-
porting the appliance. Carry the appliance
by its integrated carrying handle
14a
.
Operation
Switching on and off
■ Direction of rotation of the tool!
■ Insert the plug into a mains power socket.
Switching on
♦ Press the ON/OFF switch
and keep it
pressed.
Switching off
♦ Release the ON/OFF switch
.
Setting the cutting depth
WARNING! RISK OF INJURY!
► Always remove the power plug from the
wall socket before carrying out any work on
the appliance.
♦ Adjust the screw on the cutting depth adjust-
ment
with the aid of the supplied hex key
(small)
.
♦ Test the cutting depth by lowering the motor
unit.
Changing the cutting disc
WARNING! RISK OF INJURY!
► Always remove the power plug from the
wall socket before carrying out any work on
the appliance.
► Allow the cutting disc
to cool down
before you touch it
► Check the cutting disc
. It should not be
damaged or damp, and it should have no
cracks. Otherwise, it could break during
use and cause injuries.
NOTE
► Only use cutting disks which comply with the
performance data stated in this manual.
♦ Remove one of the mounting screws
with the
supplied hex key (small) . Loosen the other
mounting screw so that you can slide the
protective cover to the side (see fig. A). Do
not remove the protective the cover !
Bekijk gratis de handleiding van Parkside PMTS 180 B2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PMTS 180 B2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3636 MB |
