Parkside PMNF 1500 B2 handleiding
Handleiding
Je bekijkt pagina 13 van 152
PMNF 1500 B2
■ 8
│
GB
│
IE
Replacing the diamond cutting discs
(see Figures A - F)
NOTE
►
Replace diamond cutting discs only in pairs.
♦ Loosen the locking screw .
♦ Push the depth stop upwards.
♦ Press the spindle lock and hold it down.
♦ Use the face spanner to loosen the locking
flange .
♦ Take off all removable parts from the spindle.
♦ Clean the locking flange , flange , blotters
and backing flange thoroughly.
♦ Attach the backing flange (see Fig. A).
NOTE
►
Make sure that the backing flange is
correctly attached by ensuring that it rotates
together with the spindle.
♦ Attach the first diamond cutting disc (see
Fig. B).
♦ Set the desired cut width in accordance with
the number of blotters . Ensure that the flange
is set in place as the top blotter (see Fig. C
and F).
♦ Attach the second diamond cutting disc
(see Fig. D).
NOTE
►
Make sure that the cutting discs are correctly
attached to the flanges.
♦ Tighten the locking flange using the face
spanner
. Press the spindle lock while
doing this (see Fig. E).
Setting the groove depth
♦ Loosen the locking screw .
♦ Set the depth stop to the desired depth.
♦ Tighten the locking screw .
Attaching the dust extraction adapter
♦ Push the pins of the dust extraction adapter
into the recesses on the dust extraction connector.
♦ Lock the dust extraction adapter by turning it.
♦ Loosen the union nut .
♦ Push the pipe of the extraction device far enough
into the opening on the union nut .
♦ Tighten the union nut fully.
Operation
Switching on and off
NOTE
►
Always switch the appliance on before making
contact with the material, then apply it to the
workpiece. The wall grinder is equipped with
an electronic smooth start. The motor starts
with a delay.
Switching the appliance on:
♦ Activate the safety lock-out (see fold-out
page). Then press the ON/OFF switch .
Switching the appliance off:
♦ Release the ON/OFF switch .
Bekijk gratis de handleiding van Parkside PMNF 1500 B2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PMNF 1500 B2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16639 MB |
