Parkside PLSBA 40-Li A1 handleiding
Handleiding
Je bekijkt pagina 18 van 56
GB
18
3. To switch off, briey press the on/off
switch (14).
Turbo mode
1. To switch on, press the turbo button
(15) to turn the suction/blowing power
to turbo power for a maximum of 15
seconds.
2. To switch off, press the turbo button
(15) again to exit turbo mode.
Checking the charge status
of the battery
The charge level of the battery is indicated
by illumination of the corresponding LED
lights.
3 LEDs illuminated (red, orange and
green): Battery charged
2 LEDs illuminated (red and orange):
Battery partially charged
1 LED illuminated (red):
Battery needs to be charged
Checking the charge level on the
battery
The battery charge status indicator (19) on
the battery (17) shows the charge level.
Press the button (18) on the battery (17).
The charge level is indicated by illumina-
tion of the corresponding LED lights.
Checking the charge level during
operation
The charge level indicator (13) on the con-
trol panel signals the charge level of the
batteries (17) during operation.
Working with the leaf
blower
The leaf vacuum/blower may
only be used for the follow-
ing purposes:
- As a blower to pile up dry leaf
material or to blow material out
of places that are hard to access
(e.g. under cars)
- As a suction device to suck up
dry leaf material. The device
also functions as a shredder in
the suction function. The dry
leaves are shredded and their
volume is reduced, preparing
the material for later compost-
ing if desired. The shredding
intensity depends on the size
of the leaf material and its re-
sidual moisture. Uses other than
those described here may dam-
age the machine and put the
operator at risk.
During work, ensure that the device
is not struck against hard objects,
which can cause damage. Do not suck up
any solid bodies such as stones, branches
or pieces of branch, r cones or similar,
since these can damage the device, in
particular the shredding mechanism.
Repairs of this type are not covered
by the guarantee.
Blowing operating mode:
The device cannot be operat-
ed if the impeller cover
(
30) is not closed and cor-
rectly screwed.
Bekijk gratis de handleiding van Parkside PLSBA 40-Li A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PLSBA 40-Li A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7317 MB |
