Parkside PLSBA 40-Li A1 handleiding
Handleiding
Je bekijkt pagina 15 van 56
GB
15
RESIDUAL RISK
Even if properly operating and han-
dling this electric tool, some residual
risks will remain. Due to its construc-
tion and build, this electric tool may
present the following hazards:
a) Ear damage if working without
ear protection.
b) Damage to your health caused
by swinging your hands and
arms when operating the appli-
ance for longer periods of time
or if the unit is not held or main-
tained properly.
c) Lung damage, if suitable respira-
tory protection is not worn.
d) Eye injuries if no suitable eye
protection is worn.
Warning! During operation,
this electric tool generates an
electromagnetic īeld which,
under certain circumstances,
may impair the functionality
of active or passive medical
implants. In order to reduce
the danger of serious or fatal
injuries, users who wear medi-
cal implants must consult their
doctor and the manufacturer
of the implant before operat-
ing the machine.
Assembly
Assembling the pipes and
wheels
Never use the leaf blower
with only one suction pipe
section attached. There is a
risk of personal injury!
The device cannot be operated if
the impeller cover (
30) is not
closed and correctly screwed.
Illustration
:
1. Insert the two wheels (8) into the holder
(7).
2. Slide the holder with the wheels onto
the lower blower pipe (6).
You may need to press the re-
lease (23) of the holder to set
the desired level of the grid on the low-
er blower pipe (6).
3. Attach the lower blower pipe (6) to the
lower suction pipe (9) with two of the
enclosed Phillips screws.
Illustration
:
1. Push the upper suction pipe (10) into
the motor housing (3).
2. Attach the upper suction pipe (10) to
the right and left of the motor housing
(3) with two of the enclosed Phillips
screws.
3. Push the upper blower pipe (11) into
the motor housing (3) until it clicks into
place.
Fitting the pipes:
1. Put the lower suction pipe (9) and low-
er blower pipe (6) on the upper suction
pipe (10) and the upper blower pipe
(11).
Disassembly is done in reverse order.
Attaching the carrying strap
Illustration :
ā¢ Hook the carrying strap (22) with the
snap hook (21) into or out of the eyelet
(24) on the motor housing (3).
Bekijk gratis de handleiding van Parkside PLSBA 40-Li A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PLSBA 40-Li A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7317 MB |
