Parkside PKSB 54 A1 handleiding
Handleiding
Je bekijkt pagina 10 van 25
GB/IE/NI10
4. Use of the cable protection box
Check first whether the plug, coupling and multiple
socket strip you wish to insert are de-energised.
Open the cable protection box by pulling the
securing clips
1
upwards (see Figure 1).
1
1 1
Connect the plug to the coupling or the multiple
socket strip.
Note:
A multiple socket strip can optionally be fixed to the
bottom part of the cable protection box using cable
ties (5 - 7.5 mm). For this, use the intended
cable tie
bushing
4
(see Figure 2).
2
Insert the plug, coupling and multiple socket strip
into the cable protection box (see Figure 3).
The cable tie bushing
3
consists of two parts.
Separate them by pulling the clip lugs
5 out-
wards and at the same time removing the clips
6 upwards (see Figure 4).
4
Guide the cable through the bushing
3
. Here,
pay attention to the correct cable diameter so
that the cable clamp
A
or
B
the cable is cor-
rectly fixed. Then, re-insert the clip
6
until it
locks into place.
3
Bekijk gratis de handleiding van Parkside PKSB 54 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PKSB 54 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2289 MB |
