Parkside PHSSA 20-Li D2 handleiding
Handleiding
Je bekijkt pagina 23 van 148

GB
MT
23
Note
An incorrect battery can damage the ma-
chine and the battery.
Inserting the battery (Fig.A)
1. To insert the battery (14), push the bat-
tery (14) along the guide rail (17) into the
appliance. You will hear it click into place.
Removing the battery (Fig.A)
1. Press the battery release (13).
2. Pull the battery (14) out of the appliance.
3. Let go of the battery release (13).
Operation
Working instructions
CAUTION! Risk of injury. Do not oper-
ate the appliance if damaged or incorrectly
assembled! Replace damaged parts and
dirty filters (see Spare parts and accessories,
p.27).
• Also inspect the appliance for visual dam-
age.
• Ensure that the collection container (1) fil-
ter holder (3) and filter (4) are dry when
changing directly from wet vacuuming to
dry vacuuming!
• Only vacuum liquid up to the “Maximum
fill level” mark (2).
• Always hold the appliance vertically dur-
ing transport, otherwise liquid will leak
out! Hold the attached wet nozzle (10)
downwards.
Switching on and off
Note
Before switching on, check whether the filter
holder (3) and filter (4) are inserted and dry
(see Attaching and removing the filter holder/
filter, p.22).
Switching on (Fig.A)
1. Push the on/off switch (6) forwards.
Switching off (Fig.A)
1. Pull the on/off switch (6) backwards.
Cleaning, maintenance and
storage
WARNING! Risk of injury due to unin-
tentional start-up. Protect yourself when
performing maintenance or cleaning work.
Switch off the device and remove the battery
(14).
You should have any repair and maintenance
work that is not described in these instruc-
tions carried out by our Service Centre. Only
use original replacement parts.
Cleaning
General cleaning
WARNING! Electric shock! Never spray
down the device with water.
Notes
• Risk of damage. Chemical substances
may attack the plastic parts of the ma-
chine. Do not use any cleaning agents or
solvents.
• Make sure to keep the ventilation open-
ings free of foreign objects.
• Clean the surface of the appliance with a
soft brush or cloth.
• Empty the collection container (1) after
every use.
• Clean the collection container (1) with a
damp cloth.
Cleaning the filter
(Fig.A)
1. Remove the collection container (1), see
Attaching and removing the collection
container, p.22.
2. Remove the filter holder (3) / filter (4), see
Attaching and removing the filter holder/
filter, p.22.
3. Tap the filter (4) and clean it with a brush
or compressed air.
4. You can also clean a heavily soiled filter
(4) under running water. The filter (4) must
be completely dry before reuse.
5. If the filter (4) is too dirty, replace it with
a new filter (4) (see Spare parts and
accessories, p.27).
6. Fit the filter holder (3) / filter (4), see
Attaching and removing the filter holder/
filter, p.22.
7. Attach the collection container (1), see
Attaching and removing the collection
container, p.22.
Maintenance
Replacing the filter
Replace an excessively dirty filter (4) with
a new one. New filters can be acquired
Bekijk gratis de handleiding van Parkside PHSSA 20-Li D2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Parkside |
Model | PHSSA 20-Li D2 |
Categorie | Stofzuiger |
Taal | Nederlands |
Grootte | 15989 MB |