Parkside PHLLS 745 A1 handleiding
Handleiding
Je bekijkt pagina 7 van 152
4
|
GB / IE
■ To avoid potential risks, a
damaged power cord should
be replaced by the manufac-
turer or the manufacturer’s
customer service department
or a similarly qualied person.
CAUTION
– RISK OF ELECTRIC
SHOCK! Do not use the appli-
ance if the handle, the power
cord or the plug are damaged.
Never open the appliance!
Residual risks
■ RISK OF BURNS! Do not touch the
heated soldering tip or the molten solder.
There is a risk of being burnt. Always
allow the appliance to cool down com-
pletely before changing components,
cleaning or checking it.
■ After work, allow the appliance to cool
down in the air only.
Do not attempt to quench it with water!
■ CAUTION! RISK OF FIRE! Always use
the special holder or another reproof
surface when you put the hot appliance
down.
■ The appliance must be placed in the
holder during breaks from work.
■ Keep the appliance away from ammable
material.
■ Never leave a switched-on appliance
unsupervised.
■ CAUTION! RISK OF INJURY! Keep your
hands away from the heated workpiece.
The heat can be emitted through the
workpiece.
■ Avoid contact between the hot soldering
tip and the plastic parts of the holder.
Otherwise, the appliance might be
damaged.
■ In case of danger, pull the plug out of
the power outlet immediately.
■ CAUTION! RISK OF POISONING! Do
not breathe in vapours.
■ During work over an extended period in
which hazardous vapours can be created,
always ensure sucient ventilation of
the workplace. In addition, protective
gloves, a face mask and work apron are
recommended.
■ Avoid eating, drinking and smoking in
rooms where soldering work is taking
place. Otherwise, lead residues on your
hands might contaminate the food, drink
or cigarettes and be absorbed into your
body.
■ Always wash your hands thoroughly
after soldering.
■ Do not dispose of solder waste in normal
household waste. Solder waste should
be disposed of with hazardous waste.
■ Take care when using the appliances in
the vicinity of inammable materials.
■ Do not aim at the same place for a
prolonged period of time.
■ Do not use in the presence of an explo-
sive atmosphere.
■ Heat can be transferred to combustible
materials which are hidden from view.
■ Replace on stand after use and allow
to cool before putting it away.
IB_458701_PHLLS745A1_LB8.indb 4IB_458701_PHLLS745A1_LB8.indb 4 10.07.2024 15:33:4410.07.2024 15:33:44
Bekijk gratis de handleiding van Parkside PHLLS 745 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PHLLS 745 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17148 MB |
