Parkside PGS 500 C2 handleiding
Handleiding
Je bekijkt pagina 8 van 48
GB / CY
│
5
5. Service
a) Have your power tool serviced by
a qualied repair person using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained.
WARNING!
Always wear safety googles
Wear a dust mask.
Safety instructions for all
applications
General safety instructions for grinding
a) This power tool is designed to be
used as a grinder. Please follow all
safety instructions, directives, dia-
grams and data that you receive with
the appliance. Failure to follow the
instructions below may result in electric
shock, re and/or serious injuries.
b) This power tool is not suitable for
wire brushing, sandpaper sanding,
abrasive cutting or polishing. Using
the power tool for applications for which
it is not designed is hazardous and may
cause injuries.
c) Do not use any accessories that have
not been provided or recommended
by the manufacturer for this power
tool. Just because you can attach the
accessories to your power tool does not
guarantee they are safe to use.
d) The maximum permissible speed of
the accessory tool being used must
be at least as high as the maximum
speed specied for the power tool.
Accessories that rotate faster than the
permissible rate can break and throw
pieces into the air.
e) The external diameter and thickness
of the accessory tool being used must
comply with the dimensions of your
power tool. Incorrectly dimensioned
accessory tools cannot be suciently
shielded or controlled.
f) Grinding tools or other accessories
must
t precisely onto the grinding
spindle or collet chuck
of your power
tool. Accessory tools that do not t pre-
cisely into the take-up of the power tool
will rotate unevenly, vibrate severely and
may lead to loss of control.
g) Grinding tools or other accessories
mounted on a mandrel must be com-
pletely inserted in the collet or chuck.
Any “protrusion” or exposed parts
of the mandrel between the grinding
tool and the collet or chuck must be
kept to a minimum. If the mandrel is
not suciently tightened or the grinding
tool protrudes too far, the accessory tool
can come loose and be ejected at high
speed.
h) Never use damaged accessory tools.
Before each use, check accesso-
ry tools such as grinding tools for
chipping and cracks, abrasion or
heavy wear. If the power tool or the
accessory tool is dropped, check to
see if it is damaged or use an undam-
aged accessory tool. When you have
checked and inserted the accessory
tool, ensure that you and any other
people nearby remain outside of the
range of the rotating accessory tool
and allow the tool to rotate at maxi-
mum speed for one minute. Damaged
accessory tools usually break during this
test period.
IB_458746_PGS500C2_LB7_CY.indb 5IB_458746_PGS500C2_LB7_CY.indb 5 18.07.2024 13:37:5718.07.2024 13:37:57
Bekijk gratis de handleiding van Parkside PGS 500 C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PGS 500 C2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5180 MB |
