Parkside PGS 500 C2 handleiding
Handleiding
Je bekijkt pagina 7 van 48
4
│
GB / CY
3. Personal safety
a) Stay alert, watch what you are doing
and use common sense when opera-
ting a power tool. Do not use a power
tool while you are tired or under the
inuence of drugs, alcohol or medica-
tion. A moment of inattention while ope-
rating power tools may result in serious
personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing pro-
tection used for appropriate conditions
will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the o-position before
connecting to power source and/or
battery pack, picking up or carrying
the tool. Carrying power tools with your
nger on the switch or energising power
tools that have the switch on invites ac-
cidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rota-
ting part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper foo-
ting and balance at all times. This ena-
bles better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from mo-
ving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
g) If devices are provided for the con-
nection of dust extraction and coll-
ection facilities, ensure these are
connected and properly used. Use of
dust collection can reduce dust-related
hazards.
4. Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your applica-
tion. The correct power tool will do the
job better and safer at the rate for which
it was designed.
b) Do not use the power tool if the
switch does not turn it on and o. Any
power tool that cannot be controlled
with the switch is dangerous and must
be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any ad-
justments, changing accessories or
storing power tools. Such preventive
safety measures reduce the risk of star-
ting the power tool accidentally.
d) Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are dange-
rous in the hands of untrained users.
e) Maintain power tools. Check for misa-
lignment or binding of moving parts,
breakage of parts and any other
condition that may aect the power
tool’s operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly maintai-
ned power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations dierent from those intended
could result in a hazardous situation.
IB_458746_PGS500C2_LB7_CY.indb 4IB_458746_PGS500C2_LB7_CY.indb 4 18.07.2024 13:37:5618.07.2024 13:37:56
Bekijk gratis de handleiding van Parkside PGS 500 C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PGS 500 C2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5180 MB |
