Parkside PGS 500 C2 handleiding
Handleiding
Je bekijkt pagina 12 van 48
GB / CY
│
9
■ Observe the manufacturer‘s recom-
mendation for small grinding tools. The
maximum permissible protrusion (L0 =
length of the shaft between the collet
chuck end and the small grinding tool)
specied by the manufacturer must not
be exceeded when using small grinding
tools! If the protrusion (L0) is increased,
the permissible rotation speed must
be lowered. Wherever possible, insert
the complete length of the shaft of the
accessory tool into the collet chuck.
Ensure that the clamping length (Lg) is at
least 10 mm.
Only use attachment parts with a maxi-
mum mandrel length of 40 mm.
Grinding stone
♦ Grinding work can be performed on vari-
ous metals using the grinding stone
.
Switching on and o/setting speed
range
CAUTION!
■ The rotating direction of the grinding
spindle can be read o the arrow en-
graved on the front of the appliance
(anticlockwise symbol).
Switching on/setting the speed range
♦ Set the ON/OFF switch
to the "I" po-
sition.
♦ Set the steplessly adjustable speed con-
trol
to a position between "1" and “6".
Switching o
♦ Move the ON/OFF switch
to the posi-
tion "O".
Notes on material processing/tool/
speed range
■ The work result depends on the speed,
the type of material and the contact
pressure. Carry out tests on test pieces
to determine the optimum settings.
Position of the
speed control
Idle speed (rpm)
1 approx. 4500
2 approx. 9000
3 approx. 17500
4 approx. 22500
5 approx. 27000
6 approx. 30000
Cleaning, care and storage
WARNING! RISK OF INJURY!
■ Switch o the appliance and pull out
the power plug before starting any
work on the appliance.
The appliance is maintenance-free.
■ Remove all dirt from the appliance. Use
a dry cloth to do this.
WARNING!
■ If the power cord requires replace-
ment, this should be carried out by the
manufacturer or an approved repre-
sentative to avoid safety hazards.
■ Store the appliance and all the individual
pieces carefully in the provided plastic
case to ensure you do not lose any part.
NOTE
► Replacement parts not listed (such as
carbon brushes, switches) can be or-
dered via our service hotline.
IB_458746_PGS500C2_LB7_CY.indb 9IB_458746_PGS500C2_LB7_CY.indb 9 18.07.2024 13:37:5718.07.2024 13:37:57
Bekijk gratis de handleiding van Parkside PGS 500 C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PGS 500 C2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5180 MB |
