Parkside PEH 30 D4 handleiding
Handleiding
Je bekijkt pagina 7 van 151
PEH 30 D4
GB
│
IE
│
3 ■
Technical data
Rated voltage 230 V ∼, 50 Hz (AC)
Nominal output 750W
Rated idle speed n
0
16500 rpm
Plane width 82 mm
Cut depth 0–3 mm
Fold depth max. 18 mm
Protection class II /
(double insulation)
Noise and vibration data
Noise measurement value determined in accordance
with EN 62841. The A-rated noise level of the
power tool is typically as follows:
Noise emission value
Sound pressure level L
PA
= 90.07 dB
Sound power level L
WA
= 98.07 dB
Uncertainty K = 3 dB
Wear hearing protection!
Total vibration value
Handle a
h
= 2.881 m/s
2
Additional handle a
h
= 4.023 m/s
2
Uncertainty K = 1.5 m/s
2
NOTE
► For an accurate estimate of the vibration load
during a specific working period, the periods
during which the appliance is switched off or
is running but not actually being used must
also be taken into consideration. This can
significantly reduce the vibration load over
the total working period.
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be used
for comparison of the power tool with
another tool.
NOTE
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the
power tool is being used, and in particular
the kind of workpiece that is being worked,
the vibration and noise emission values can
deviate from the values given in these instruc-
tions during actual use of the power tool.
Try to keep the vibration loads as low as
possible. Measures to reduce the vibration
load are, e.g. wearing gloves and limiting the
working time. Wherein all states of operation
must be included (e.g. times when the power
tool is switched off and times where the power
tool is switched on but running without load).
General power tool
safety warnings
WARNING!
► Read all safety warnings, instructions,
illustrations and specifications provided
with this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
IB_471090_PEH30D4_LB8.indb 3IB_471090_PEH30D4_LB8.indb 3 09.01.2024 14:14:1609.01.2024 14:14:16
Bekijk gratis de handleiding van Parkside PEH 30 D4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PEH 30 D4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15971 MB |
