Parkside PDRA 20-Li B3 handleiding
Handleiding
Je bekijkt pagina 19 van 42
16 GB/IE/NI
Noise and vibration emission value
Vibration value a
h
2.067 m/s
2
Uncertainty K 1.5 m/s
2
The stated noise and vibration emission
value was measured in accordance with a
standard testing procedure and may be used
to compare one product to another. The stated
noise and vibration emission value may also
be used for a preliminary exposure assessment.
Using built-in suction function
(Fig. N, O and P)
The product can be operated independently
without domestic water supply through the built-
in water suction function.
m
WARNING!
u Do not immerse the product in water.
There is a risk of personal injury from
electric shock.
u Avoid operating the product without water
flowing (dry run). This can damage the
product by overheat.
NOTE
u Do not suck water from any natural
accumulator. There is a risk of
contamination from backwashed cleaning
agent.
u When suctioning, provide sufficient water.
Dry running can damage the product.
Only use the water suction function with
a water hose [9] equipped with a filter
basket [].
Insert the filter basket [] into the water
collector (e.g. water bucket). The filter
basket [] has to be fully covered with
water.
Operation
m
CAUTION!
u The recoil force of the emitted water jet
can be strong. Stand firmly and hold the
main handle [4] securely.
u Never operate the product with a closed
water tap. Dry running can damage the
product.
Switching the product on/off
(Fig. K)
Switching on
1. Press and hold the switch lock button [2].
2. Push down and hold the switch trigger [3] to
switch on and operate the product.
3. Release the switch lock button [2].
Switching off
1. Release the switch trigger [3] to switch off
the product.
2. Press down the switch trigger [3] briefly
to check if the switch trigger [3] is in lock
position.
3. Remove the battery pack [] from the
product.
4. Disconnect the product from the water
supply source.
5. Follow the “Switching on” procedure with
removed battery pack [] and disconnected
water supply source to release the residual
pressure and water inside the product.
6. Release the switch trigger [3].
7. Press down the switch trigger [3] briefly
to check if the switch trigger [3] is in lock
position.
Bekijk gratis de handleiding van Parkside PDRA 20-Li B3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PDRA 20-Li B3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4273 MB |
