Parkside PDNB 6.3 B2 handleiding
Handleiding
Je bekijkt pagina 21 van 90
■ 18
│
GB
│
IE
PDNB 6.3 B2
Maintenance and cleaning
WARNING! RISK OF INJURY! Discon-
nect the tool from the compressed air
supply.
ATTENTION!
► Before maintenance, clean off any hazardous
substances that may (due to working processes)
have accumulated on the tool. Avoid all skin
contact with these substances. If the skin
comes into contact with hazardous dusts, this
can lead to severe dermatitis.
► The dust and vapours produced by using the
tool can be hazardous to health (e.g. cause
cancer, birth defects, asthma and/or dermati-
tis); it is essential to carry out a risk assessment
in respect of these risks and to implement cor-
responding regulatory mechanisms.
NOTE
► To ensure correct functioning and long-term
durability of the tool, pay attention to the
following points:
■ Before each use, check the tool and the acces-
sory tool. Also check the speed and vibration
levels.
■ After each use, check the speed and vibration
level of the tool. During maintenance work,
wear appropriate protective clothing (ear muffs,
dust mask, protective goggles and protective
gloves).
■ Sufficient and continuously intact oil lubrication
is highly important for optimum functioning.
■ Use only the genuine replacement parts recom-
mended by the manufacturer, otherwise you
could put users at risk.
In doubt, contact the Service Centre.
■ Use only accessories and supplies of the sizes
and types recommended by the manufacturer.
■ Clean the tool only with a soft, dry cloth or with
compressed air.
■ Never use sharp or abrasive cleaning agents
under any circumstances.
■ Store the tool in a clean and dry location. Make
sure that no moisture can get into the tool.
Disposal
The packaging consists of environmen-
tally friendly material. It can be dis-
posed of in local recycling containers.
Do not dispose of the tool in the normal
domestic waste!
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out tool.
Dispose of the packaging in an
environmentally friendly manner.
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary.
The packaging material is labelled with
abbreviations (a) and numbers (b) with
the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites.
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out product.
The product is recyclable, subject to
extended producer responsibility and
is collected separately.
Dispose of lubricants and cleaning agents in an
environmentally friendly manner. Observe the legal
regulations.
■ Dispose of lubricant residues at a disposal
point. Do not allow lubricants to get into drains
or watercourses. Do not allow them to get into
the subsoil/soil. Make sure you use a suitable
mat/surface. Dispose of lubricants in accord-
ance with official regulations.
Dispose of contaminated maintenance material
and consumables at a collection point provided for
this purpose
.
Bekijk gratis de handleiding van Parkside PDNB 6.3 B2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PDNB 6.3 B2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8582 MB |
