Parkside PDNB 6.3 B2 handleiding
Handleiding
Je bekijkt pagina 20 van 90
GB
│
IE
│
17 ■
PDNB 6.3 B2
NOTE
► Regular lubrication is particularly important to
prevent friction and corrosion damage
. We
recommend using a suitable special oil for
compressed air tools (e
.g. Liqui Moly compres-
sor oil)
.
– Lubrication with mist oiler
A mist oiler (not supplied) continuously and
optimally lubricates the tool as a prepara-
tion stage after the pressure reducer
. A mist
oiler gives off fine drops of oil into the air
flow and thus guarantees regular lubrica-
tion
.
The following options are available
♦ Attach a maintenance unit with an oiler to the
compressor.
♦ Add 3–5 drops of pneumatic oil into the con-
nector nipple 1 every 15 minutes of operation.
Connecting to a compressed air
source
NOTE
► Before connecting the compressed air source,
– the correct working pressure (6.3 bar) must
be fully reached, and
– make sure that the trigger 3 is not actuated.
► Use only connection hoses with an internal
diameter of at least 9mm.
► Use only filtered, lubricated and regulated
compressed air.
♦ Connect the tool to a compressor by attaching
the connector nipple 1 to the supply hose of
the compressed air source.
ATTENTION!
► Ensure that the compressed air hose is firmly
attached. A loose hose can thrash about un-
controllably, causing serious danger. Likewise,
ensure firm seating of the two screw connec-
tions between the coupling piece and the tool.
♦ The compressed air source must be equipped
with a pressure reducer so that you can regu-
late the air pressure.
Use
Operation
♦ Make sure that the workpiece is correctly
clamped.
♦ First press the safety lock-out 2 and then pull
the trigger 3 to turn on the tool. Pull and hold
the trigger 3. The further you pull in the trigger,
the faster the tool operates.
♦ Make sure that you guide the tool parallel to
the surface you are working on, otherwise it
can bend or twist.
ATTENTION!
► Sparks can occur while working which could
hit people or flammable materials! Secure the
danger area first.
CAUTION!
► Do not exert excessive pressure when working
with the tool as this could damage the work-
piece.
♦ Release the trigger 3 if the tool is jammed, the
compressed air supply is interrupted or you
want to stop working.
♦ Disconnect the tool from the compressed air
source after you finish work.
Bekijk gratis de handleiding van Parkside PDNB 6.3 B2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PDNB 6.3 B2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8582 MB |
