Parkside PDFW 120 B3 handleiding
Handleiding
Je bekijkt pagina 14 van 86
12 GB/IE/NI/CY
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working
conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
h) Keep handles and grasping
surfaces dry, clean and free from
oil and grease. Slippery handles
and grasping surfaces do not allow for
safe handling and control of the tool in
unexpected situations.
Service
a) Have your power tool serviced
by a qualified repair person
using only identical replacement
parts. This will ensure that the safety of
the power tool is maintained.
m
CAUTION!
u When using power tools, note the
following basic safety precautions to
protect yourself against electrical shock,
injury and fire hazards.
u Read all these instructions before using
this power tool and store the safety
instructions in a safe place.
Safety instructions for bench
grinders
a) Never use damaged accessory
tools. Check accessory tools such
as grinding discs before each
use for chips or cracks and wire
brushes for loose or broken wires.
When you have checked and
inserted the accessory tool, ensure
that you and any other people in
the vicinity remain outside of the
range of the rotating accessory
tool and allow the tool to rotate
at maximum speed for one
minute. Damaged accessory tools
usually break during this test period.
b) The maximum permissible speed
of the accessory tool used must be
at least as high as the maximum
speed specified for the power
tool. Accessories which rotate faster than
the maximum permissible rate can break
and throw pieces into the air.
c) Be aware that brushes can lose
wire bristles even during ordinary
operation. Do not overstress
the wires by applying excessive
pressure to the brush. Flying wire
bristles can easily penetrate light clothing
and/or skin.
d) Never grind using the edge of the
grinding disc. Grinding with the edge
can cause grinding discs to break and fly
apart.
Before every use, make sure that
the grinding discs are in a usable
condition. Also carry out a sound test
to detect cracks. This is done by gently
tapping the disc with a non-metallic hammer
to the right and left of the vertical centre
line. The taps should cause a light “ringing
sound”. If the resulting sound is dull, the disc
should not be used.
Change the worn grinding wheel if the
spark deflectors can no longer be set to the
required distance of max. 2mm from the
grinding wheel.
Use the power tool only with accessory
tools mounted on both spindles. This
prevents any accidental contact with the
rotating spindle.
Always use the protective cover, the tool
rest, the viewing window and the spark
deflector as required depending on the
accessory tool used.
Only use wheel with a diameter
corresponding to the required marking.
Replace damaged or heavily furrowed
grinding discs.
When transporting the bench grinder, lift it
by the housing or the two protective covers.
Bekijk gratis de handleiding van Parkside PDFW 120 B3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PDFW 120 B3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9931 MB |
