Parkside PBSDA 20-Li A1 handleiding
Handleiding
Je bekijkt pagina 10 van 181
■ 6
│
GB
│
IE
PBSDA 20-Li A1
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries.
Protect the rechargea-
ble battery from heat; for example, from con-
tinuous exposure to sunlight, fire, water and
moisture.
There is a risk of explosion.
6. Service
a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained.
b) Never try to repair damaged batteries.
Maintenance of batteries should only be
carried out by the manufacturer or an
approved customer service centre.
Safety information for belt grinders
WARNING!
■ Dusts from materials such as leaded paint,
some types of wood and metal can be
harmful to your health.
■ Contact with or inhalation of these dusts can
represent a health hazard for the person
operating the device and other people in
the vicinity.
■ Wear safety goggles and a protective dust
mask!
Before use
Charging the battery pack
CAUTION!
► Always unplug the appliance before you
remove the battery pack from or connect
the battery pack to the charger.
WARNING!
► Observe the safety instructions and the
instructions on charging and correct use
given in the operating instructions for your
series battery and charger.
A detailed description of the charging pro-
cess and further information can be found in
these separate operating instructions.
NOTE
► Ideally, charge the battery completely before
use. You can charge the lithium-ion battery at
any time without shortening its service life.
Interrupting the charging process does not
damage the battery.
► Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C.
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level
is between 50% and 80%. The storage climate
should be cool and dry and the ambient tem-
perature should be between 0°C and 50°C.
► The recommended ambient temperature
range for using tools and batteries is between
–5°C and 50°C.
♦ If necessary, remove the battery pack 0
from the appliance.
♦ Insert the battery pack 0 into the charger a.
♦ Insert the mains plug into the mains socket.
♦ When charging is complete, disconnect the
charger a from the mains.
♦ Pull the battery pack 0 out of the charger a.
♦ Switch off the charger for at least 15 minutes
between successive charging sessions. Also
disconnect the mains plug.
Bekijk gratis de handleiding van Parkside PBSDA 20-Li A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PBSDA 20-Li A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19465 MB |
