Parkside PBNSG 20-Li A1 handleiding
Handleiding
Je bekijkt pagina 11 van 28
PBNSG 20-Li A1
■ 8
│
GB
│
IE
│
NI
Changing the gripper jaws
Friction can wear out the gripper jaws q. If this
happens, replace the worn gripper jaws with the
supplied replacement gripper jaws 0 as follows.
♦ Screw the union nut 1 off the housing using a
suitable pliers (not included).
♦ Pull off the nose housing 8.
♦ Screw off the gripper jaws holder w with a size
17 open-ended spanner (not included).
♦ Note the position of the worn gripper jaws q
and replace them with the new replacement
gripper jaws 0.
♦ Assembly is carried out in reverse order.
Disposal
Do not dispose of power tools
in your normal domestic waste!
The adjacent symbol of a crossed-out
dustbin means that this appliance is
subject to Directive 2012/19/EU. This directive
states that this appliance may not be disposed of in
the normal household waste at the end of its useful
life, but must be taken to specially set-up collection
locations, recycling depots or disposal companies.
The disposal is free of charge for the user.
Protect the environment and dispose of this
appliance properly.
If your old appliance has stored any personal data,
you are responsible for deleting it yourself before
returning it.
If it is possible to do so without destroying the old
appliance, remove the old batteries or recharge-
able batteries before returning the appliance for
disposal and take them to a separate collection
point. In the case of permanently installed rechar-
geable batteries, you must indicate during disposal
that the appliance contains a battery.
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out product.
The packaging is made from environ-
mentally friendly material and can be
disposed of at your local recycling plant.
Dispose of the packaging in an
environmentally friendly manner.
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary. The packag-
ing material is labelled with abbreviations (a) and
numbers (b) with the following meanings:
1–7: plastics, 20–22: paper and cardboard,
80–98: composites.
Kompernass Handels GmbH
warranty
Dear Customer,
This appliance has a 3-year warranty valid from
the date of purchase. If included with the product
on delivery, the battery packs of the X12V and
X20V Team series also come with a 3-year warranty
from the date of purchase. If this product has any
faults, you, the buyer, have certain statutory rights.
Your statutory rights are not restricted in any way
by the warranty described below.
Warranty conditions
The warranty period starts on the date of purchase.
Please keep your receipt in a safe place. This will
be required as proof of purchase.
If any material or manufacturing fault occurs within
three years of the date of purchase of the product,
we will either repair or replace the product for you
or refund the purchase price (at our discretion).
This warranty service requires that you present the
defective appliance and the proof of purchase
(receipt) within the three-year warranty period,
along with a brief written description of the fault
and of when it occurred.
If the defect is covered by the warranty, your prod-
uct will either be repaired or replaced by us. The
repair or replacement of a product does not signify
the beginning of a new warranty period.
IB_444079_PBNSG20-LiA1_IE-NI.indb 8IB_444079_PBNSG20-LiA1_IE-NI.indb 8 16.01.2024 12:04:0816.01.2024 12:04:08
Bekijk gratis de handleiding van Parkside PBNSG 20-Li A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PBNSG 20-Li A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3289 MB |
